We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 120mm frame 25mm deep two wire leads

Fans

Fans AD1212LB-A72GL 12V 12025 120mm 25mm case fan

SKU CH-Z7PD-YEKWY

A 120 mm case fan with 25 mm depth, 12 V DC power, 34.4 dBA noise and 71.806 cu.ft/min airflow using ball bearings

  • Low 34.4 dBA noise for quiet operation
  • 806 CFM airflow delivers strong cooling
  • 120 mm × 25 mm frame fits standard mounts
  • Ball bearing ensures long service life
  • 12 V DC at 150 mA for efficient power use

12V 120mm ball-bearing case fan

The ADDA AD1212LB-A72GL is a 12V DC axial fan built for 120mm mounting points with a 25mm frame depth. It uses a ball bearing for durable rotation and connects via two lead wires. The unit draws 150mA and is suited for general chassis airflow or component cooling where a standard 120mm slot exists.

71.806 CFM airflow at 34.4 dBA

At full speed the fan moves 71.806 cubic feet per minute (2.032 m³/min) while producing a noise rating of 34.4 dBA. That output handles moderate heat loads from mid-range CPUs or GPU zones, but it will not satisfy high-static-pressure needs such as dense radiator fins or heavily restricted drive cages.

Two-wire 12V power, 120mm mounting

The fan requires a 12V DC source delivered through its two-wire lead, so it plugs directly into a motherboard header, fan controller or molex adapter without PWM control. Its 120mm by 25mm footprint fits standard case vents and radiator mounts, leaving adjacent slots free for additional fans or cable routing.

Highlights

  • Low 34.4 dBA noise for quiet operation
  • 806 CFM airflow delivers strong cooling
  • 120 mm × 25 mm frame fits standard mounts
  • Ball bearing ensures long service life
  • 12 V DC at 150 mA for efficient power use

Specifications

No published specifications for this item yet.

Questions about this item

Will the 120mm frame and 25mm depth fit my existing 12025 mounting holes?

Yes — the fan uses the standard 120mm by 25mm frame size, so it aligns with any 12025 mounting pattern you already have.

How can I confirm the fan is running at its rated speed after installation?

At 12V the unit draws 150mA and produces 34.4dBA; measure current or listen for that noise level to verify normal operation.

Does the package include a 3-pin or 4-pin adapter, or only the two lead wires?

The fan ships with two lead wires only; any 3-pin, 4-pin or Molex adapter must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.