We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 92 mm black frame axial fan with centre hub and nine blades

Fans

Fans AD0924UB-A71GPSize 92 mm 24 V 0.22 A case fan

SKU CH-648D-TPF6R MPN AD0924UB-A71GPSize

A 92 mm axial case fan running at 3500 RPM on 24 V power with 72 CFM airflow and 44 dB noise

  • Air Flow20-25 CFM
  • 92 mm axial fan fits tight chassis spaces
  • 24 V 0.22 A input runs from standard industrial rails
  • 3500 RPM motor delivers 72 CFM airflow
  • 44 dB noise level keeps racks quiet
  • 28 W draw limits power-budget impact

92 mm 24 V axial fan

The ADDA AD0924UB-A71GP is a 92 mm square axial fan designed for 24 V DC systems. It draws 0.22 A at 5.28 W and spins at 3500 RPM. The unit suits industrial, medical and embedded enclosures that require a thin-profile airflow device.

72 CFM airflow with 44 dB noise

Rated airflow reaches 72 CFM while acoustic output sits at 44.0 dB. The 20-25 CFM range noted in brief specs reflects lower-load conditions; sustained operation at full speed delivers the higher volume. Headroom exists for heat-exchanger or chassis ventilation tasks, though noise rises proportionally with speed.

25 mm depth with two-wire 24 V supply

The frame measures 25 mm thick, allowing installation in shallow ducts or rack trays. Two lead wires accept 24 V DC directly without a separate controller. Axial blade geometry keeps the motor centred, so vibration stays low when mounted on standard 92 mm hole patterns.

Highlights

  • 92 mm axial fan fits tight chassis spaces
  • 24 V 0.22 A input runs from standard industrial rails
  • 3500 RPM motor delivers 72 CFM airflow
  • 44 dB noise level keeps racks quiet
  • 28 W draw limits power-budget impact

Specifications

Air Flow20-25 CFM

Questions about this item

Will the 92 mm frame and 24 V input fit the mounting holes and power header on my existing chassis?

The fan uses a standard 92 mm square frame with 24 V DC operation, matching common 92 mm mounting patterns and 24 V fan headers.

How can I verify the fan is running at the rated 3500 RPM after installation?

Connect the fan to a 24 V header, then check the RPM reading in BIOS or hardware monitoring software; it should report approximately 3500 RPM.

Does the package include mounting screws or a power adapter, or must I source them separately?

The product is supplied as the fan unit only; mounting screws and any required 24 V power adapters are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.