We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fans

Fans AD0912UB-A73GP 92mm 25mm 12V 0.46A case fan

SKU CH-3YE0-2M8CA

12 V DC axial fan, 92 mm frame and 25 mm depth, delivers 56.95 cu ft/min at 39.4 dBA with ball-bearing reliability

  • Delivers 56.95 cu.ft/min airflow for effective case cooling
  • Operates at 39.4 dBA keeping system noise low
  • Ball bearing design extends fan service life
  • Compact 92 mm frame fits standard 9025 mounting holes
  • Runs on 12 V DC with 0.46 A current draw

92 mm 12 V ball-bearing case fan

The AD0912UB-A73GP is a 92 mm square frame fan with a 25 mm depth designed for chassis, power-supply or motherboard cooling. It operates on 12 V DC and draws 0.46 A through a two-lead wire connection.

1.6 m³/min airflow at 39.4 dBA

The fan delivers 1.604 m³/min (56.95 cu.ft/min) of airflow, which suits general case ventilation and moderate component cooling. The 39.4 dBA noise rating means it will be audible in quiet rooms and may not meet silent-build requirements.

Two-wire 12 V DC power only

This model uses a simple two-lead wire connection without PWM or tachometer feedback. It is not suited for headers that require a three- or four-pin connector or for systems that rely on automatic speed control.

Highlights

  • Delivers 56.95 cu.ft/min airflow for effective case cooling
  • Operates at 39.4 dBA keeping system noise low
  • Ball bearing design extends fan service life
  • Compact 92 mm frame fits standard 9025 mounting holes
  • Runs on 12 V DC with 0.46 A current draw

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12V 0.46A 92mm fan fit in my older case that uses 92mm 25mm mounts?

Yes, the frame is 92mm square and 25mm deep, matching the standard 9225 mounting pattern used on many older cases and power supplies.

How can I confirm the fan is running at the rated 56.95 cu.ft/min airflow after installation?

Listen for the 39.4 dBA noise level and feel for steady airflow; the ball-bearing motor should spin smoothly without rattling when powered from a 12V DC source.

Does the AD0912UB-A73GP come with a 3-pin or 4-pin connector, or do I need to buy an adapter?

The fan ships with two bare lead wires only; you will need a separate 2-pin to 3-pin or 4-pin adapter if your motherboard or controller requires a header connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.