Fans
Fans AD0824UB-A71GL 80x25mm DC 24V 0.26A 2Wire axial server inverter case fan
An 80 mm axial fan with a 25 mm frame runs on 24 V DC at 0.26 A using a two-wire connection
- 24 V DC power suits server and inverter builds
- 80 mm square frame fits standard 80 x 25 mm mounts
- 26 A draw keeps power budget low
- Two-wire connection enables simple installation
80 mm 24 V axial fan for servers
The AD0824UB-A71GL is an 80 mm by 25 mm DC fan rated for 24 V and 0.26 A. It uses a two-wire connection and an axial blade design to move air through server and inverter chassis. The unit is supplied new and matches the original ADDA specification.
Suits maintainers replacing a failed 24 V 80 mm fan
Technicians needing a direct swap for the AD0824UB-A71GL will find the correct voltage, current and frame size. Builders who require PWM speed control, a three- or four-wire header, or a different frame thickness should look at other models.
Highlights
- 24 V DC power suits server and inverter builds
- 80 mm square frame fits standard 80 x 25 mm mounts
- 26 A draw keeps power budget low
- Two-wire connection enables simple installation
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the AD0824UB-A71GL fan in a server chassis and what wiring step is often missed?
Mount the 80x25mm frame using the four corner screw holes, then connect the two-wire lead to a 24V DC header; the step often missed is confirming polarity before powering on.
What maintenance will the AD0824UB-A71GL need after extended use?
Plan to clean dust from the axial blades and verify the 0.26A current draw remains steady; bearing wear eventually requires full fan replacement.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
