We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 60x60x20mm case fan with center hub and blade ring

Fans

Fans AD0612HB-C76GL 60x60x20mm case fan

SKU CH-2WXC-J894W

A 60 mm square DC 12 V case fan spinning at 5100 RPM with double ball bearings for 18.93 CFM airflow at 35.5 dB(A)

  • 12 V DC power draws only 1.92 W for efficient cooling
  • 5100 RPM delivers 18.93 CFM airflow across components
  • Double ball bearing ensures long life at 35.5 dBA
  • Compact 60×60×20 mm frame fits tight chassis spaces
  • Light 49.0 g weight adds minimal load to builds

60 mm 12 V Double Ball Bearing Fan

This 60 mm square axial fan runs on 12 V DC and draws 0.16 A for 1.92 W of power. Double ball bearings support a 5100 RPM speed that delivers 18.93 CFM airflow at 4.06 mm static pressure. Acoustic output is rated at 35.5 dB(A) and the unit weighs 49.0 g.

Fits Tight 12 V Cooling Slots — Not for Variable

The fixed 12 V supply and single-speed 5100 RPM design suit enclosures that need constant high airflow in a 60 mm frame. Builders who require PWM control, lower noise floors or larger frame sizes should consider alternative models.

5100 RPM Fixed Speed Decides Fit

The constant 5100 RPM rating determines whether this fan meets the thermal and acoustic targets of the intended chassis. Verify that the system can accommodate the fixed airflow and noise level before purchase.

Highlights

  • 12 V DC power draws only 1.92 W for efficient cooling
  • 5100 RPM delivers 18.93 CFM airflow across components
  • Double ball bearing ensures long life at 35.5 dBA
  • Compact 60×60×20 mm frame fits tight chassis spaces
  • Light 49.0 g weight adds minimal load to builds

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the AD0612HB-C76GL in a 60 mm fan slot and what step do people miss?

Align the four screw holes on the 60 mm frame with the case or heatsink mounts, insert 60 mm fan screws through the frame into the threaded holes, and tighten evenly; the step often missed is checking that the airflow arrow on the fan side points toward the component you want to cool.

What maintenance or replacement will the double ball bearing need later?

The double ball bearing is sealed and rated for continuous operation at 5100 RPM; no lubrication is required, but if noise rises above the specified 35.5 dB/A or rotation becomes rough after extended use, replace the entire fan unit.

At what point does the 12 V 0.16 A motor hit its thermal limit under sustained load?

The motor draws 1.92 W at 12 V and 0.16 A; under sustained load the first limit reached is the bearing temperature ceiling, which typically appears as a gradual RPM drop from 5100 RPM or an increase in noise beyond 35.5 dB/A before any electronic protection activates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.