We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square axial case fan with central hub and curved blades, 220V 0.27A rating, 55-60 CFM airflow

Fans

Fans A2259-HBL case fan 220V 0.27A 55-60 CFM

SKU CH-4YW0-1B387 MPN A2259-HBL

220 V ball-bearing case fan delivers 55-60 CFM airflow at 2100 RPM with a 50,000-hour service life

  • Air Flow55-60 CFM
  • Delivers 55-60 CFM airflow for effective case cooling
  • Runs on 220V mains power at 0.27A current draw
  • Ball bearing design rated for 50000h service life
  • Operates reliably from -20 to 85°C ambient range
  • Spins at 2100 RPM for strong air movement

AC-powered case fan for industrial chassis

The A2259-HBL is a 220 V AC axial fan rated at 0.27 A and 55-60 CFM, designed for equipment enclosures that run from mains voltage. It suits builders integrating cooling into medical devices, rail vehicles, or industrial cabinets where DC power is not available.

Wiring and vibration are the main install concerns

Because the fan connects directly to 220 V mains, installation requires proper insulation, strain relief and compliance with local electrical codes; mistakes create a shock hazard. The ball bearing and 62 dB noise level also transmit vibration to thin panels, so secure mounting with rubber isolators is advisable.

Mains voltage fixes speed and airflow

Running on 50/60 Hz AC locks the fan to 2100/1900 RPM with no PWM or voltage control, so airflow stays at 650/585 CFM and noise at 62/60 dB regardless of thermal load. The 50 000-hour service life assumes operation within the -20 to 85 °C range; exceeding those limits or cycling power frequently will shorten it.

Highlights

  • Delivers 55-60 CFM airflow for effective case cooling
  • Runs on 220V mains power at 0.27A current draw
  • Ball bearing design rated for 50000h service life
  • Operates reliably from -20 to 85°C ambient range
  • Spins at 2100 RPM for strong air movement

Specifications

Air Flow55-60 CFM

Questions about this item

How can I verify the fan is running at the correct speed after installation?

The fan should spin at 2100 RPM at 50 Hz or 1900 RPM at 60 Hz; you can confirm this with a tachometer or motherboard monitoring software.

What is included with the A2259-HBL and are mounting screws or a power cable supplied separately?

The unit is the fan motor only; mounting hardware and a 220 V power lead are not included and must be sourced separately.

Which voltage and current version of the A2259-HBL should I select for a 220 V 50 Hz supply?

Choose the 220 V model rated at 0.24 A and 56 W for 50 Hz operation; the 0.27 A / 60 W rating applies at 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.