We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fans

Fans 92x92x25mm DC12V 0.18A 3-Line Case Fan

SKU CH-61CP-PBNVA

A 92 mm square case fan with 25 mm depth runs on 12 V DC at 0.18 A using a three-line connector

  • 12 V DC power for efficient system cooling
  • 92 mm square frame fits standard mounting points
  • 25 mm slim profile suits compact chassis builds
  • Three-wire connection enables speed monitoring

Compact 92 mm case fan for standard chassis cooling

This 92 mm square frame fits the common mounting pattern used in many mid-tower and small-form-factor cases. It runs on a 12 V DC supply and draws 0.18 A, making it compatible with typical motherboard or controller headers. The three-line connection provides power, ground and a tachometer signal so the system can monitor rotational speed. It is intended for builders who need a direct-replacement fan for existing 92 mm locations.

Slim 25 mm depth with three-wire speed monitoring

The 25 mm thickness keeps clearance tight against side panels or drive cages, while the three-wire lead plugs straight into standard 3-pin headers without adapters. Tachometer feedback lets the BIOS or fan-control software adjust curves based on actual RPM rather than voltage alone. Buyers who require PWM four-pin control or higher static-pressure ratings for dense radiators should look elsewhere.

Highlights

  • 12 V DC power for efficient system cooling
  • 92 mm square frame fits standard mounting points
  • 25 mm slim profile suits compact chassis builds
  • Three-wire connection enables speed monitoring

Specifications

No published specifications for this item yet.

Questions about this item

What 12 V interface does the 3-line connector use?

The fan runs on 12 V DC and draws 0.18 A through its three-wire connector.

Will the 92 mm square frame with 25 mm depth fit my case fan slots?

Yes, it measures 92 mm by 92 mm by 25 mm, matching standard 92 mm mounting holes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.