Fans
Fans 8414NH 80x80x25mm 24V DC 3600rpm 79m3/h case fan
An 80 mm square case fan moves 79 m³/h of air at 3600 rpm while running on 24 V DC and producing 37 dB noise
- 80 x 80 x 25 mm compact frame fits tight chassis spaces
- 79 m³/h airflow moves heat through dense heatsinks
- 37 dB noise level keeps acoustic profile low
- Ball bearing design extends operational lifespan
- 24 V DC 2.4 W draw suits industrial and server power rails
Compact 80 mm DC fan for tight builds
The Ebmpapst 8414NH axial fan measures 80 x 80 x 25 mm and runs on 24 V DC, making it a direct fit for industrial enclosures, small-form-factor PCs or any chassis where mounting depth is restricted. Its 2.4 W draw and 100 mA maximum current keep the load light on limited power budgets.
Ball-bearing motor with 3600 rpm speed control
A ball bearing supports the 3600 rpm rotor, and the unit accepts 100 % speed control via analog or serial interface so system integrators can tune airflow to match thermal demand. The 79 m³/h rating delivers focused air movement through heat exchangers or dense component stacks without requiring additional ducting.
Steady 37 dB output under continuous duty
At full speed the fan produces 37 dB of noise, a level that remains consistent during prolonged operation rather than spiking under load. GreenTech EC electronics maintain efficiency across the duty cycle, and the steel frame resists vibration so airflow stays stable in 24/7 environments such as server racks or embedded appliances.
Highlights
- 80 x 80 x 25 mm compact frame fits tight chassis spaces
- 79 m³/h airflow moves heat through dense heatsinks
- 37 dB noise level keeps acoustic profile low
- Ball bearing design extends operational lifespan
- 24 V DC 2.4 W draw suits industrial and server power rails
Specifications
No published specifications for this item yet.
Questions about this item
How long will the ball bearing last at 3600 rpm?
The ball bearing is rated for continuous operation at 3600 rpm with a 2.4 W power draw.
What noise and heat should I expect after hours of use?
The fan runs at 37 dB and draws 2.4 W, so heat output stays low during all-day operation.
Which connector and voltage does the 8414NH need?
It requires a 24 V DC supply capable of 100 mA and uses the standard ebmpapst 8400 series lead.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114354BTC
In stock
