We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black plastic frame with centre rotor, 60mm wide and 25mm deep

Fans

Fans 622HH case fan 60x60x25mm 12V 8200rpm 56m3/h

SKU CH-JYK5-YGVH9

A 60 mm square DC case fan spinning at 8200 rpm to deliver 56 m³/h airflow at 43 dB

  • High airflow 56m³/h from compact 60x60x25mm frame
  • High static pressure at 8200rpm for dense heatsinks
  • Ball bearing motor rated for long continuous operation
  • Electronic protection against reverse polarity and rotor blocking
  • Low 3.5W power draw at 12V DC supply

Ebmpapst 622HH 60mm case fan

The Ebmpapst 622HH is a 60 x 60 x 25 mm DC axial fan that runs on 12 V and spins at 8200 rpm. It delivers 56 m³/h of airflow at a noise level of 43 dB while drawing 3.5 W and 292 mA. The ball-bearing motor includes electronic protection against reverse polarity, blocking and overload. A fiberglass-reinforced PBTP housing and PA impeller keep weight to 390 g.

Suits tight high-pressure cooling spots

Builders who need a compact, high-speed fan for dense heatsinks or restricted chassis clearance will appreciate the 8200 rpm rating and 56 m³/h flow. The two-lead AMG22 TR64 connection with stripped and tinned ends simplifies wiring. Buyers who want a larger frame, lower noise or PWM speed control should look at something else because this model uses a fixed-speed 12 V DC design and a 60 mm square footprint.

Check voltage, mounting and connector

Verify that your system provides a 12 V DC supply capable of at least 292 mA per fan. Confirm the 60 x 60 mm mounting pattern matches your case or heatsink holes and that 25 mm depth fits the available space. Ensure the two-lead stripped and tinned cable can be terminated to your fan header or controller without an adapter.

Highlights

  • High airflow 56m³/h from compact 60x60x25mm frame
  • High static pressure at 8200rpm for dense heatsinks
  • Ball bearing motor rated for long continuous operation
  • Electronic protection against reverse polarity and rotor blocking
  • Low 3.5W power draw at 12V DC supply

Specifications

No published specifications for this item yet.

Questions about this item

Does my case have a 60 mm mounting grid for the 622HH fan?

The 622HH measures 60 x 60 x 25 mm, so your chassis needs standard 60 mm screw holes with 25 mm clearance behind the frame.

Can the 12 V 622HH share a PWM header with older 12 V fans?

The fan draws 292 mA at 12 V DC through a two-lead AMG22 TR64 cable; it has no PWM wire, so it runs at full 8200 rpm whenever the header supplies 12 V.

How do I confirm the 622HH is moving 56 m3/h at 8200 rpm after install?

Listen for the rated 43 dB noise level and feel the high-pressure exhaust; the ball-bearing motor should spin smoothly clockwise when viewed from the motor side.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.