We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black plastic axial fan sixty by sixty millimetres twenty five point four deep with centre hub and seven blades

Fans

Fans 614NGL 60x60x25.4mm 24V DC case fan

SKU CH-4GM6-8361R

A 60 x 60 x 25.4 mm 24 V DC axial fan delivering 21 m³/h airflow at 2500 rpm with 16 dB noise and sleeve bearing

  • Quiet operation at 16 dB noise level
  • Efficient cooling with 21 m³/h airflow
  • Reliable 24 V DC power at 1 W consumption
  • Compact 60 x 60 x 25.4 mm form factor
  • Protected by polarity reverse and overload safeguards

Compact 60 mm axial fan for 24 V DC systems

The Fans 614NGL is a 60 x 60 x 25.4 mm axial case fan designed for 24 V DC operation. It draws 1 W at 41 mA and spins at 2500 rpm to deliver 21 m³/h of airflow. The sleeve bearing and integrated electronic commutation suit industrial, medical and embedded cooling tasks. Polarity reverse, blocking and overload protection are built in.

Limits of the 24 V DC supply and sleeve bearing

The fan requires a stable 24 V DC source; it will not run from 12 V or AC lines. Airflow is capped at 21 m³/h and noise at 16 dB, so it cannot meet high-static-pressure or high-volume demands. The sleeve bearing has a finite life at continuous 2500 rpm and is not rated for extreme vibration or temperature cycling beyond the supplier's general range.

Check voltage, mounting

Verify that your system provides 24 V DC and can accommodate the 60 mm square footprint with 25.4 mm depth. Confirm the 21 m³/h flow meets your thermal target and that the 16 dB noise level is acceptable. Ensure the two-wire polarity-protected connector matches your wiring harness and that the reinforced fiberglass frame fits your chassis cut-out.

Highlights

  • Quiet operation at 16 dB noise level
  • Efficient cooling with 21 m³/h airflow
  • Reliable 24 V DC power at 1 W consumption
  • Compact 60 x 60 x 25.4 mm form factor
  • Protected by polarity reverse and overload safeguards

Specifications

No published specifications for this item yet.

Questions about this item

Is the 614NGL the only 60×60×25.4 mm model in the 600NG series?

The supplier title lists only the 614NGL in that exact size; other model numbers shown belong to different series and dimensions.

What does 21 m³/h airflow actually deliver inside a typical chassis?

At 2500 rpm the fan moves 21 m³/h, which is suited to spot-cooling small enclosures or low-power components rather than high-flow case ventilation.

How does the 24 V DC input limit where the 614NGL can be used?

The fan requires a 24 V DC source drawing 41 mA, so it must be powered from a compatible rail or adapter rather than a standard 12 V motherboard header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.