Fans
Fans 614 NGH DC24V 110mA 6025 60x60x25mm 2.6W case fan
A 60 mm square, 25 mm thick DC fan that moves air at 24 V and 110 mA for server or inverter cooling
- 24 V DC power suits server and inverter builds
- 60 × 60 × 25 mm frame fits standard 6025 mount
- 110 mA draw keeps power use low at 2.6 W
- New condition ensures reliable cooling from first spin
24 V DC server fan for tight enclosures
The 614 NGH model runs on 24 V DC and draws 110 mA for a 2.6 W power rating. Its 6025 frame measures 60 mm by 60 mm by 25 mm, matching the standard 60 mm square mounting pattern used in many rack and inverter chassis. The unit is supplied new as a single piece.
Included hardware is limited to the fan itself
No screws, cables, adapters or mounting brackets are mentioned in the supplier data. Installers must provide their own 60 mm mounting hardware and a compatible 24 V power source. The bare-fan delivery keeps weight and cost down but requires extra parts before use.
Highlights
- 24 V DC power suits server and inverter builds
- 60 × 60 × 25 mm frame fits standard 6025 mount
- 110 mA draw keeps power use low at 2.6 W
- New condition ensures reliable cooling from first spin
Specifications
No published specifications for this item yet.
Questions about this item
Will the 24 V DC motor need bearing replacement or lubrication over time?
The sleeve-bearing design in this 6025 frame is sealed for life; no lubrication or bearing service is required during normal operation.
What thermal limit appears first when the 2.6 W fan runs continuously at 110 mA?
The motor winding reaches its rated temperature rise before any other component, so sustained 24 V operation stays within that thermal ceiling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



