Fans
Fans 414J 40 x 40 x 25.4mm 19m3/h 24V DC case fan
Compact 40 x 40 x 25.4 mm axial fan moves 19 m³/h at 39 dB with a 24 V DC ball-bearing motor
- Compact 40 x 40 x 25.4 mm footprint fits tight chassis spaces
- Ball-bearing motor runs smoothly in any mounting orientation
- 19 m³/h airflow at 10 300 rpm delivers focused cooling
- 39 dB noise level keeps acoustic profile low
- 24 V DC, 2.4 W draw suits efficient power budgets
Compact 40 mm axial fan for tight enclosures
The 414J measures 40 x 40 x 25.4 mm and runs on 24 V DC, making it suitable for small industrial chassis or dense networking gear. Ball bearings allow mounting in any orientation without affecting lifespan. It draws 100 mA at 2.4 W and spins at 10 300 rpm.
Airflow ceiling of 19 m³/h at 39 dB
At full speed the fan delivers 19 m³/h while producing 39 dB of noise, a level that suits equipment racks but may be audible in quiet offices. The 400 series housing is aerodynamically shaped to keep turbulence low, yet the physical size limits total air volume. Designers needing higher static pressure or greater flow must select a larger frame.
Ball-bearing durability with pillar exhaust
The ball-bearing construction tolerates continuous operation in any mounting angle, and the plastic frame resists vibration. Exhaust exits through the pillar side, so cable routing and neighbouring components must leave that face clear. Four 40 mm mounting points match standard fan grilles, simplifying replacement in existing 400 series cut-outs.
Highlights
- Compact 40 x 40 x 25.4 mm footprint fits tight chassis spaces
- Ball-bearing motor runs smoothly in any mounting orientation
- 19 m³/h airflow at 10 300 rpm delivers focused cooling
- 39 dB noise level keeps acoustic profile low
- 24 V DC, 2.4 W draw suits efficient power budgets
Specifications
No published specifications for this item yet.
Questions about this item
How do I pick the right version of the 414J fan for my voltage rail?
The 414J is a 24 V DC model drawing 100 mA and 2.4 W; choose it only if your system supplies 24 V.
What does the 19 m³/h airflow deliver inside a tight chassis?
At 10 300 rpm the fan moves 19 m³/h through a 40 × 40 mm frame, suited for spot-cooling dense component clusters.
What connector standard does the 414J use and what does it limit?
The fan uses a standard two-wire DC lead; the 24 V supply caps speed at 10 300 rpm and noise at 39 dB.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115165BTC
In stock
