We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 40mm black frame axial fan 10mm deep with centre sticker and seven blades

Fans

Fans 414F 4010 24V 0.8W 40x40x10mm case fan

SKU CH-6TRY-Q73M2

A 40 × 40 × 10 mm 24 V DC axial fan delivering 8 m³/h airflow at 5 400 rpm with 22 dB noise and a sleeve bearing

  • Ultra-thin 10 mm profile fits tight chassis spaces
  • 24 V DC supply with integrated polarity-reverse protection
  • Low 0.8 W power draw reduces system load
  • Quiet 22 dB operation at 5400 rpm speed
  • Sleeve-bearing 400 series design for cost-effective cooling

Compact 24 V axial fan for tight enclosures

The Fans 414F 4010 measures 40 x 40 x 10 mm and runs on 24 V dc, drawing 800 mW at 33 mA. It delivers 8 m³/h airflow at 5 400 rpm while producing 22 dB of noise, making it suited for small cabinets, telecom shelves or inverter cooling where space is limited.

Glass-fibre reinforced frame with sleeve bearing

The 400 series uses a glass-fibre reinforced plastic structure and a sleeve bearing for cost-effective shaft protection. Integrated electronics provide polarity-reverse and lock protection, so the fan tolerates wiring mistakes during installation or field replacement.

Replaces larger or louder 40 mm fans in legacy gear

Builders upgrading older 4010-size units gain lower power draw and quieter operation without changing mounting holes. The jump is worth it when the existing fan exceeds 22 dB or consumes more than 0.8 W, but buyers who need higher static pressure or ball-bearing longevity should look elsewhere.

Highlights

  • Ultra-thin 10 mm profile fits tight chassis spaces
  • 24 V DC supply with integrated polarity-reverse protection
  • Low 0.8 W power draw reduces system load
  • Quiet 22 dB operation at 5400 rpm speed
  • Sleeve-bearing 400 series design for cost-effective cooling

Specifications

No published specifications for this item yet.

Questions about this item

What does the 24 V dc supply voltage mean for compatible power sources?

The fan requires a 24 V dc source and draws 33 mA at 800 mW, so the supply must provide at least that current at 24 V.

Will the 40 x 40 x 10 mm frame fit my chassis fan slots?

It fits any standard 40 mm square cut-out with 10 mm depth clearance; verify screw-hole spacing matches the 400 series pattern.

How do I connect the leads without triggering the polarity-reverse protection?

Identify the positive and negative wires, apply 24 V dc with correct polarity; the integrated electronics block operation if reversed, so double-check before powering.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.