Fans
Fans 4028E12B-13 DC 12V 0.35A 3-wire 40x40x28mm case fan
A 40 mm square, 28 mm thick DC fan running at 12 V and 0.35 A with a three-wire connection for speed monitoring
- 12 V DC power for direct PSU connection
- 35 A draw keeps system power budget low
- 40 × 40 × 28 mm frame fits tight server chassis
- 3-wire lead enables RPM monitoring by motherboard
Compact 40 mm server fan for tight builds
This 40x40x28 mm DC fan runs on 12 V and draws 0.35 A through a three-wire connector. It is designed for server chassis and small-form-factor cases where a 4028 profile is required. The slim frame fits narrow ducting and 1U spaces that larger fans cannot occupy.
Simple three-wire mounting with polarity care
The three-pin plug connects directly to a standard motherboard or fan-controller header; align the keyed connector to avoid reversed polarity. No PWM signal wire is present so speed control relies on voltage regulation only. Verify the header supplies 12 V before powering on to prevent start-up failure.
Highlights
- 12 V DC power for direct PSU connection
- 35 A draw keeps system power budget low
- 40 × 40 × 28 mm frame fits tight server chassis
- 3-wire lead enables RPM monitoring by motherboard
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the 12 V 0.35 A fan is spinning correctly after connecting the 3-wire header?
Check the motherboard BIOS or monitoring software for an RPM reading on the corresponding fan header; a steady value means the tachometer signal is working.
What comes in the box with the 40x40x28 mm cooler fan and do I need extra screws or a power adapter?
The package contains only the fan unit; standard 40 mm mounting screws and a 3-pin 12 V header on the board are required for installation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



