We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 92 mm frame axial fan with seven blades and four mounting holes

Fans

Fans 3610KL-05W-B50Size 92×92×25mm 24V 0.2A case fan

SKU CH-170S-G9T0P MPN 3610KL-05W-B50Size

A 92 × 92 × 25 mm axial case fan running at 24 V and 0.2 A delivers 40–45 CFM at 3200 RPM with 41 dBA noise

  • Air Flow40-45 CFM
  • 24 V 0.2 A draw keeps power use low at 4.8 W
  • 3200 RPM delivers 40-45 CFM airflow for effective cooling
  • 41 dBA noise level suits quiet workstations and servers
  • 92 × 92 × 25 mm frame fits standard case mounts
  • 50 000 hour rated life supports long-term reliability

NMB 3610KL 92 mm Axial Fan

This 92 mm axial fan operates at 24 V and draws 0.2 A for a rated power of 4.8 W. It spins at 3200 RPM and delivers between 40 and 45 CFM of airflow with a static pressure of 48 Pa. The unit is rated for 50 000 hours of service life across a temperature range of -20 °C to 75 °C. Acoustic output is specified at 41 dBA.

Upgrade from Lower-CFM 92 mm Fans

Replace an older 92 mm fan that moves less air or runs louder at the same voltage. The jump is worthwhile when a chassis or heatsink needs more throughput without changing mounting holes or voltage rails. Builders staying with 24 V systems gain headroom without rewiring.

Cooling Capacity and Limits

The fan comfortably handles spot cooling for industrial electronics, medical devices and rail vehicle drives where 40-45 CFM clears moderate heat loads. It runs out when a dense radiator or high-restriction filter demands significantly higher static pressure than 48 Pa. The 25 mm thickness fits standard 92 mm mounts but leaves no room for thicker alternatives.

Highlights

  • 24 V 0.2 A draw keeps power use low at 4.8 W
  • 3200 RPM delivers 40-45 CFM airflow for effective cooling
  • 41 dBA noise level suits quiet workstations and servers
  • 92 × 92 × 25 mm frame fits standard case mounts
  • 50 000 hour rated life supports long-term reliability

Specifications

Air Flow40-45 CFM

Questions about this item

What are the mounting hole dimensions for the 92 mm square frame?

The fan has a 92 mm square frame with a 25 mm thickness; standard 92 mm case-fan mounting holes apply.

How do I connect the 24 V power leads correctly?

Connect the two wires to a 24 V DC source observing polarity; the fan draws 0.20 A (4.8 W) at 3200 RPM.

When should I plan to replace the fan based on its rated life?

The manufacturer rates the bearing life at 50000 hours of continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.