Fans
Fans 2410ML-05W-B60 24V 60x60x25mm Ball Bearing Case Fan
A 24 VDC ball-bearing tubeaxial fan delivering 25.0 CFM at 5300 RPM with 36.0 dB noise
- Delivers 25.0 CFM airflow for efficient cooling
- Ball bearing rated for 5300 RPM continuous operation
- Operates across 10–27.6 VDC input range
- Certified CE, CSA, UL and VDE approvals
- Compact 60×60×25 mm frame fits tight spaces
Compact 60 mm DC fan for 24 V systems
The NMB 2410ML series tubeaxial fan measures 60 by 60 by 25 mm and runs on 24 VDC with a 10 to 27.6 V operating range. It draws 0.130 A and 3.12 W while spinning at 5 300 RPM to deliver 25.0 CFM of airflow. The two-wire lead termination suits direct wiring in industrial enclosures, embedded PCs or telecom chassis where space is tight and 24 V distribution is standard.
Replaces sleeve-bearing fans that wear out early
The ball bearing construction extends service life compared with sleeve alternatives, especially in continuous-duty or high-vibration environments. The upgrade is worthwhile when maintenance intervals must be long and the operating temperature spans -10 to 50 °C. Approvals include CE, CSA, UL and VDE for regulatory compliance in commercial and industrial equipment.
Steady airflow and pressure under constant load
At 5 300 RPM the fan sustains 25.0 CFM and 0.293 in H2O static pressure without the RPM drop typical of sleeve bearings as they age. Acoustic output remains at 36.0 dB during prolonged operation. The 64.86 g weight and compact frame minimise structural loading while the wide voltage range absorbs supply variation without stalling.
Highlights
- Delivers 25.0 CFM airflow for efficient cooling
- Ball bearing rated for 5300 RPM continuous operation
- Operates across 10–27.6 VDC input range
- Certified CE, CSA, UL and VDE approvals
- Compact 60×60×25 mm frame fits tight spaces
Specifications
No published specifications for this item yet.
Questions about this item
What are the mounting hole spacing and overall dimensions for the 60 mm square frame?
The fan measures 60 mm by 60 mm with a 25 mm thickness; standard 60 mm fans use a 50 mm hole pattern.
How do I connect the two wire leads to a 24 VDC supply without reversing polarity?
Connect the red lead to positive and the black lead to negative within the 10 to 27.6 VDC range; the fan draws 0.130 A at 24 V.
When should I plan to replace the ball-bearing fan in continuous operation?
Ball bearings typically last 50 000 hours at 50 °C; monitor for rising noise above 36 dB or RPM drop below 5300 as replacement indicators.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114708BTC
In stock
