We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 mm square case fan with seven blades and wire leads

Fanhome

Fanhome MULTIFAN8314HL 24V 4.3W 8032 8CM case fan

SKU CH-R8K8-GY1HK

24 V 4.3 W EBMPAPST 8032 series 8 cm case fan for targeted chassis airflow

  • 24 V input simplifies integration with industrial power supplies
  • 3 W draw keeps energy costs low in continuous operation
  • 8032 RPM delivers strong airflow for dense chassis
  • 8314 model code ensures exact replacement matching
  • Tested working condition confirms reliability before installation

80 mm 24 V axial fan for compact chassis

The Fanhome MULTIFAN8314HL is an 80 mm frame fan designed for 24 V DC operation and rated at 4.3 W. It targets system builders who need a direct replacement in tight industrial or server enclosures where 8032 form-factor units are specified.

24 V supply and fixed 4.3 W draw

The fan requires a stable 24 V rail and will draw its rated 4.3 W continuously; voltage outside this nominal value is not supported by the motor design. No PWM or speed-control interface is documented, so the unit runs at full speed whenever power is applied.

Verify connector pin-out

The supplier notes that wire colours or connector styles may differ between production batches of the same 8314 model. Compare the existing fan’s plug and screw-hole pattern with the replacement to ensure mechanical and electrical compatibility.

Highlights

  • 24 V input simplifies integration with industrial power supplies
  • 3 W draw keeps energy costs low in continuous operation
  • 8032 RPM delivers strong airflow for dense chassis
  • 8314 model code ensures exact replacement matching
  • Tested working condition confirms reliability before installation

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 8032 or 8314 version for my 24 V system?

The 8314 is the model identifier and 8032 is the part code; both refer to the same 24 V 4.3 W fan, so either label matches your voltage requirement.

What does the 4.3 W rating mean for actual cooling performance?

At 24 V the fan draws 4.3 W, giving the airflow and static pressure EBMPAPST specifies for that power level in an 80 mm frame.

Does the 24 V supply connect via a standard PWM or three-pin header?

The supplier notes the fan may have different wires for the same model, so you must check your old fan's connector before ordering.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.