We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square case fan with centre hub and curved blades

Fanhome

Fanhome 8212J/2N EBMPAPST 12V 10.3W case fan

SKU CH-93QR-SGZES

Original German 8212J/2N EBMPAPST 12V 10.3W high-end case fan for reliable system cooling

  • Germany imported high-end cooling fan for reliable operation
  • 12 V power supply enables stable system integration
  • 3 W rated power delivers efficient airflow
  • Original 8212J/2N EBMPAPST model ensures exact replacement fit
  • Tested working before dispatch for immediate installation confidence

Fanhome 8212J/2N 12V case fan

This Fanhome 8212J/2N EBMPAPST fan operates at 12V and draws 10.3W. It is a Germany-imported cooling component for PC cases. The unit is supplied as a single fan tested for working condition. It suits builders replacing an identical model in an existing system.

10.3W power draw and thermal headroom

At 10.3W the fan delivers airflow for standard case cooling loads. It handles moderate component heat output in typical chassis layouts. The fixed 12V input means speed and noise stay constant under load. It runs out of headroom when higher static pressure or variable speed control is required.

12V two-wire integration

The fan connects to a 12V header or Molex adapter with no PWM signal wire. It needs a compatible two-pin socket and clearance for its frame depth. The fixed-voltage design frees the builder from fan-curve tuning but offers no low-speed idle mode. Verify the connector on the original unit before fitting.

Highlights

  • Germany imported high-end cooling fan for reliable operation
  • 12 V power supply enables stable system integration
  • 3 W rated power delivers efficient airflow
  • Original 8212J/2N EBMPAPST model ensures exact replacement fit
  • Tested working before dispatch for immediate installation confidence

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12 V 10.3 W 8212J/2N fan run from my older motherboard's standard 3-pin or 4-pin header?

The fan is rated for 12 V and draws 10.3 W, so any header that supplies 12 V at sufficient current will power it; verify the connector on your existing fan before ordering as the wire layout may differ.

How can I confirm the 8212J/2N is spinning correctly once installed?

Power the system and check the BIOS or monitoring software for a fan-speed reading that matches the expected RPM range; the fan should also move air visibly through the case.

Does the package include mounting screws or a molex adapter, or must I buy them separately?

The box contains only the 8212J/2N EBMPAPST 12 V 10.3 W fan itself; screws, adapters or cable extenders are not included and must be sourced separately if required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.