We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fanhome 10cm blower fan, 24V 8.0W, used like new

Fanhome

Fanhome 10cm blower RLF 100-11/14 24V 8.0W 335mA case fan

SKU CH-FGFH-GAKT1

10 cm blower fan rated 24 V, 8.0 W and 335 mA for elevator or case cooling

  • Compact 10cm blower fits tight chassis spaces
  • 24V 8.0W motor delivers strong airflow efficiently
  • 335mA low current draw reduces power load
  • Tested working before shipment for reliable operation
  • Replaces ebmpapst RLF 100-11/14 elevator fan directly

10 cm 24 V blower for tight enclosures

This 10 cm blower runs on 24 V and draws 8.0 W at 335 mA. It is built for equipment that needs directed airflow through a narrow duct rather than open-case circulation. The RLF 100-11/14 designation matches the original ebmpapst specification for compact industrial and elevator installations.

Fits 100 mm mounting pattern with existing wiring

The fan uses the standard 100 mm frame so it bolts into the same cut-out as the unit it replaces. Power is delivered through the existing 24 V supply; no adapter or voltage conversion is required. Because the supplier notes that wire colours may differ between production batches, verify the pin-out against the old fan before connecting.

Direct swap for worn RLF 100-11/14 blowers

This unit replaces an identical 10 cm 24 V blower that has become noisy or failed. The upgrade is worthwhile when the original fan no longer moves enough air to keep the enclosure within its thermal limits. It is not suited for builds that need a larger frame, a different voltage or speed control via PWM.

Highlights

  • Compact 10cm blower fits tight chassis spaces
  • 24V 8.0W motor delivers strong airflow efficiently
  • 335mA low current draw reduces power load
  • Tested working before shipment for reliable operation
  • Replaces ebmpapst RLF 100-11/14 elevator fan directly

Specifications

No published specifications for this item yet.

Questions about this item

How long before the 8.0 W blower reaches its thermal limit under continuous load?

The 8.0 W rating is the steady-state power draw; the motor is designed to run continuously at 24 V without a separate thermal throttle point.

What noise and heat levels should I expect when the 335 mA fan runs 24/7?

At 24 V and 335 mA the blower produces a moderate airflow hum and warm exhaust air typical for a 10 cm radial fan in constant operation.

Which connector or wiring harness must I already have to plug in the RLF 100-11/14?

The unit ships with bare leads; you need a 24 V DC source and a compatible two-pin or three-pin header that matches the wire layout of your existing fan.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.