Eyemax
Eyemax XDM-202 1080p Indoor Dome Camera 3.6mm White
2MP indoor dome camera with 3.6mm lens, 1080p HD-SDI over BNC, WDR, OSD joystick control, 12V DC power
- ColorWhite
- Camera Type2MP, Vari-Focal Lens, Dome
- TypeDome Camera
- Connection TypeBNC
- Sensor & Detector1/3 inch SONY CMOS
- HD Resolution1080P
- Full HD 1080p resolution for clear detail
- 1/3 inch SONY CMOS sensor captures bright images
- 6mm megapixel lens provides wide coverage
- WDR balances light in high-contrast scenes
- OSD joystick gives simple on-screen control
Indoor 1080p Dome Camera
The Eyemax XDM-202 is a 2MP indoor dome camera delivering 1080p resolution through an HD-SDI interface. It uses a 1/3 inch SONY CMOS sensor with a fixed 3.6mm megapixel lens and a three-axis bracket for flexible ceiling or wall mounting. The white housing suits discreet indoor installations requiring full HD video over coaxial cabling.
Upgrade from Standard Analog
This camera replaces legacy analog units limited to lower horizontal resolution, providing 1000 TVL equivalent detail and wide dynamic range for high-contrast scenes. The jump is worth it when existing BNC infrastructure must carry 1944 × 1092 pixel images at 30fps without recabling. It adds on-screen display control via joystick and a secondary analog video output for local setup or backup recording.
HD-SDI Coaxial Limits
HD-SDI signal integrity depends on RG59 or RG6 cable quality and run length; longer distances may require signal boosters or fibre converters not included here. The camera needs a separate 12V DC power supply and does not support Power over Ethernet or audio transmission. Buyers needing IP networking, PoE simplicity, or built-in microphones should consider alternative technologies.
Highlights
- Full HD 1080p resolution for clear detail
- 1/3 inch SONY CMOS sensor captures bright images
- 6mm megapixel lens provides wide coverage
- WDR balances light in high-contrast scenes
- OSD joystick gives simple on-screen control
Specifications
| Brand | Eyemax |
|---|---|
| Model | XDM-202 |
| Color | White |
| Camera Type | 2MP, Vari-Focal Lens, Dome |
| Type | Dome Camera |
| Connection Type | BNC |
| Sensor & Detector | 1/3 inch SONY CMOS |
| HD Resolution | 1080P |
| MAX Resolution | 1944 × 1092 = 2,122,648 |
| Frame Rate | 30fps |
| Night Vision | Yes |
| Audio | No |
| Power over Ethernet | No |
| Power | DC 12V |
Questions about this item
What size hole do I cut for the 3.6 mm lens on the Eyemax XDM-202 dome?
The camera is a surface-mount indoor dome; no cut-out is needed — secure the base to the ceiling or wall with screws, then snap the dome cover in place.
Which step do installers most often miss when connecting the BNC output on this XDM-202?
They forget to fit a 12 V DC power supply (sold separately) and to use RG59 or RG6 coax for the HD-SDI signal; without both the camera will not transmit video.
When will the IR LEDs on this 1080p dome need replacement?
The IR array is built into the sealed dome and is not user-replaceable; if night vision fails the entire camera unit must be swapped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



