We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Eyemax

Eyemax Bl-LD CT-695 3.5" CCTV Tester Monitor

SKU CH-JA4F-XTSV1

A 3.5 inch colour LCD tester with 960 × 240 resolution, PTZ control, UTP cable test, RS-485 data test, digital multimeter, 12 V 1 A power output, audio test, carrying bag.

  • 5 inch colour LCD shows 960 × 240 resolution for clear on-site viewing
  • Built-in PTZ control tester speeds up pan tilt zoom configuration
  • DC 12V 1A power output runs cameras directly during installation
  • UTP cable tester plus digital multimeter verifies wiring and electrical values
  • 1600mAh rechargeable battery with carrying bag enables portable field use

Purpose-built CCTV field tester

The Eyemax Bl-LD CT-695 is a handheld 3.5 inch colour LCD monitor designed for installers who commission and troubleshoot analogue surveillance systems on site. It combines a display, PTZ controller, cable tester, multimeter and 12 V power source in one portable unit.

Deciding specification: 960 × 240 resolution

The 3.5 inch screen shows 960 by 240 pixels, which determines whether camera menus and PTZ overlays remain legible during alignment. If the job requires higher definition focus peaking or IP stream decoding, this resolution will not meet that need.

Sustained-load behaviour

A 1600 mAh rechargeable battery powers the monitor, multimeter and 12 V 1 A output for extended cabinet work without mains. The DC 9 V 2 A adapter recharges the pack between shifts, while the multimeter ranges up to 300 V and 10 A stay accurate during long continuity and voltage sessions.

Highlights

  • 5 inch colour LCD shows 960 × 240 resolution for clear on-site viewing
  • Built-in PTZ control tester speeds up pan tilt zoom configuration
  • DC 12V 1A power output runs cameras directly during installation
  • UTP cable tester plus digital multimeter verifies wiring and electrical values
  • 1600mAh rechargeable battery with carrying bag enables portable field use

Specifications

BrandEyemax
ModelBl-LD CT-695

Questions about this item

What does the 960 × 240 resolution on the 3.5 inch screen mean for viewing camera feeds?

The 3.5 inch LCD shows 960 by 240 pixels, giving a clear enough picture to check camera angles, focus and PTZ movement on site without needing a separate monitor.

How does the RS-485 port work with PTZ cameras and what does it limit?

The RS-485 interface lets you send pan tilt zoom commands to compatible cameras; it handles the control signal only and does not carry video or power.

What does the tester need to fit in a tool bag and run on a job site?

It measures 3.5 inches, includes a carrying bag, runs on a 1600 mAh rechargeable battery and comes with a DC 9V 2A adapter for mains charging.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.