We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue motorcycle USB charger with dual ports, voltmeter display and on/off switch

EXTRACTME Motorcycle USB Charger 6.8A QC 3.0 Dual USB-A Voltmeter Switch Blue

SKU CH-AMVY-GW64H

Dual USB-A Quick Charge 3.0 ports deliver 6.8 A total with a built-in voltmeter and on/off switch for motorcycle handlebars

  • Dual Quick Charge 3.0 ports deliver 24W total, reaching 50% phone charge in 30 minutes
  • Built-in LED voltmeter with on/off switch monitors battery health and prevents drain below 12V
  • Waterproof rubber covers and ABS housing protect circuits from dust and rain
  • SAE quick-disconnect plus 10A fused ring-terminal cable give two battery-connection options
  • Handlebar clamp fits 1.9–2.2 cm bars or screw-mount for universal installation

Handlebar-Mount USB Charger

This waterproof motorcycle charger mounts on 1.9-2.2 cm bars or via screws and delivers 24 W through two Quick Charge 3.0 USB-A ports. A built-in voltmeter and on/off switch let you monitor battery health and cut power to prevent drain when parked.

Riders who want voltage visibility

Riders who only need a single low-power port or prefer USB-C outputs should look elsewhere. The unit also requires an existing SAE lead or a direct battery connection, so bikes without either access point cannot use it.

Dual Quick Charge 3.0 USB-A ports at 24 W total

The charger supplies up to 6.8 A combined across both USB-A sockets using Quick Charge 3.0, enabling a compatible phone to reach 50 % charge in 30 minutes while a second device charges simultaneously.

Highlights

  • Dual Quick Charge 3.0 ports deliver 24W total, reaching 50% phone charge in 30 minutes
  • Built-in LED voltmeter with on/off switch monitors battery health and prevents drain below 12V
  • Waterproof rubber covers and ABS housing protect circuits from dust and rain
  • SAE quick-disconnect plus 10A fused ring-terminal cable give two battery-connection options
  • Handlebar clamp fits 1.9–2.2 cm bars or screw-mount for universal installation

Specifications

BrandEXTRACTME

Questions about this item

What handlebar diameter range does the clamp fit?

The clamp fits handlebar diameters of 1.9-2.2cm (0.75-0.87 inch).

Which step do installers often miss when wiring the SAE ring-terminal harness to the battery?

They forget to fit the supplied 10A fuse in the harness before connecting to the battery terminals.

At what voltmeter reading should the motorcycle battery be replaced?

Replace the battery as soon as the display shows voltage lower than 12V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.