EXTRACTME Motorcycle USB Charger 6.4A Dual USB-C PD USB-A QC 3.0 Voltmeter Switch Waterproof
Dual-port motorcycle charger delivers 6.4 A total output with USB-C PD and USB-A QC 3.0, includes voltmeter, on/off switch and waterproof cover for 12–24 V systems
- Dual-port fast charging delivers up to 30W USB-C PD and 18W USB-A QC 3.0
- Real-time red LED voltmeter monitors 6-30V battery health while you ride
- Integrated ON/OFF switch cuts power to voltmeter and ports to prevent drain
- Waterproof rubber covers protect both ports from rain, dust and splashes
- Fits 1.9-2.2cm handlebars or direct battery connection via fused SAE harness
Motorcycle USB Charger for Dual Fast Charging
The EXTRACTME motorcycle USB charger delivers up to 6.4A total output through a 30W USB-C PD port and an 18W USB-A QC 3.0 port. It accepts DC 12V-24V input and monitors battery voltage from 6-30V via a red LED voltmeter. An integrated ON/OFF switch controls both the voltmeter and USB ports to prevent battery drain when parked. The unit mounts on handlebars measuring 1.9-2.2cm diameter or via screw mounting, and includes a 10A fused SAE-to-ring-terminal harness for direct battery connection.
Suited for Riders Needing Simultaneous Device
This charger suits motorcyclists who want to power a phone and a tablet or GPS at the same time while monitoring battery health on the move. The waterproof silicone covers protect the ports during rain or when the bike is stored outside. Buyers whose handlebars fall outside the 1.9-2.2cm range should look at other mounting solutions. Riders who require a hard-wired installation without an SAE connector will need a different wiring approach.
Sustained Output with Voltage Monitoring
Under continuous load the charger maintains 5V-3.4A, 9V-2.5A or 12V-2A on USB-A and 5V-3.4A, 9V-3A or 12V-2.5A on USB-C. The red LED voltmeter updates in real time so the rider can watch system voltage drop under load and spot a failing battery before it leaves them stranded. The ON/OFF switch cuts all parasitic draw during long stops, preserving the battery for the next start. ABS housing and rubber port covers keep moisture and dust from degrading the internal circuit over repeated daily use.
Highlights
- Dual-port fast charging delivers up to 30W USB-C PD and 18W USB-A QC 3.0
- Real-time red LED voltmeter monitors 6-30V battery health while you ride
- Integrated ON/OFF switch cuts power to voltmeter and ports to prevent drain
- Waterproof rubber covers protect both ports from rain, dust and splashes
- Fits 1.9-2.2cm handlebars or direct battery connection via fused SAE harness
Specifications
| Brand | EXTRACTME |
|---|
Questions about this item
Will the 10A fuse SAE-to-ring-terminal harness connect directly to my 12V motorcycle battery?
Yes, the included harness has a 10A fuse and ring terminals that bolt to a 12V battery, and the charger accepts 12V-24V input.
My handlebar measures 0.75 inch — will the clamp fit without an adapter?
The clamp fits bars from 0.75 to 0.87 inch (1.9-2.2 cm), so a 0.75-inch bar is at the minimum supported size.
After wiring, what voltage should the red LED voltmeter show with the engine running?
A healthy 12V system typically reads above 12V when running; the display covers 6-30V so you can confirm the charging system is working.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
