We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue motorcycle USB charger with dual ports, voltmeter display and handlebar mount

EXTRACTME Motorcycle USB Charger 6.4A Dual USB-C PD QC3.0 Voltmeter Blue

SKU CH-78V6-G1QW5

Waterproof dual-port motorcycle charger delivers 30 W USB-C PD and 18 W USB-A QC 3.0 with built-in voltmeter and on/off switch

  • Dual fast charging with 30W USB-C PD and 18W USB-A QC 3.0
  • Real-time battery monitoring via red LED voltmeter reading 6 to 30 volts
  • ON/OFF switch cuts power to voltmeter and ports preventing battery drain
  • Waterproof rubber covers protect USB ports from water and dust ingress
  • Two mounting options fit handlebars 1.9 to 2.2 cm or screw mounting

Motorcycle USB Charger for Phones and Tablets

The EXTRACTME charger supplies two fast-charge ports from a 12 V to 24 V motorcycle battery. A USB-C port delivers up to 30 W Power Delivery and a USB-A port provides up to 18 W Quick Charge 3.0. The unit mounts on handlebars measuring 1.9 to 2.2 cm or can be screw-mounted, and it connects via an SAE plug with a 10 A fuse or a ring-terminal harness.

Thermals Noise and Power Draw

Sealed rubber covers protect the ports from water and dust, allowing the internal circuit to run at its rated output without extra cooling. The built-in LED voltmeter and both USB ports draw power only when the ON/OFF switch is engaged, so parasitic drain is eliminated when the bike is parked. Input voltage protection activates automatically if the battery falls below 12 V or rises above 24 V.

Behaviour Under Sustained Load

During continuous riding the voltmeter displays real-time system voltage from 6 V to 30 V, letting the rider monitor battery health while both ports supply a combined 6.4 A. The 10 A SAE fuse limits current to protect wiring on long trips, and the 120 cm adapter cable reaches most mounting positions without tension. Voltage protection remains active throughout extended sessions.

Highlights

  • Dual fast charging with 30W USB-C PD and 18W USB-A QC 3.0
  • Real-time battery monitoring via red LED voltmeter reading 6 to 30 volts
  • ON/OFF switch cuts power to voltmeter and ports preventing battery drain
  • Waterproof rubber covers protect USB ports from water and dust ingress
  • Two mounting options fit handlebars 1.9 to 2.2 cm or screw mounting

Specifications

BrandEXTRACTME

Questions about this item

How do I install the EXTRACTME charger on my handlebars and what diameter range must I check first?

Clamp the unit to handlebars measuring 1.9 to 2.2 cm (0.75 to 0.87 inch); the common mistake is skipping the diameter check and forcing the mount onto oversized bars.

Which wearable part will need replacement first and how is it accessed?

The 10 A fuse inside the SAE-to-ring-terminal harness is the only user-replaceable component; pull the fuse holder apart to swap it.

What voltage limit triggers protection and stops charging during a long ride?

If the bike’s battery drops below 12 V or rises above 24 V, the built-in protection cuts output until voltage returns to the 12–24 V window.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.