We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel full-motion TV wall mount with articulating arm extended, showing tilt and swivel joints and VESA mounting plate

Explus-C

Explus-C Full Motion TV Wall Mount 26-60 inch 77 lbs VESA 400x400 PIMF9

SKU CH-GVY6-NYNDA

A full-motion wall bracket for 26-60 inch TVs up to 77 lbs with VESA 100x100 to 400x400mm, offering tilt, swivel, 3.53 to 19.51 inch extension and three-level height adjustment

  • Mount StyleWall Mount
  • Comfortable viewing with 3 post-install height levels
  • Fits 26-60 inch TVs up to 77 lbs VESA 400x400
  • Reduce glare with +5°/-15° tilt and ±90° swivel
  • Extend 19.51 out or retract to 3.53 for space
  • Premium steel build with security lock screws

Explus-C Full Motion TV Mount

The Explus-C full motion wall mount supports most flat and curved televisions from 26 to 60 inches weighing up to 77 lbs. It accepts VESA patterns from 100x100mm to 400x400mm for broad compatibility. Adjustable brackets provide three height levels after installation for comfortable viewing. Security lock screws keep the display firmly attached to the wall plate.

Capacity and VESA Range

The bracket handles screens between 26 and 60 inches with a maximum load of 77 lbs across VESA patterns up to 400x400mm. It covers the common 100x100mm through 400x400mm hole spacing used by many manufacturers. Heavier displays or VESA patterns larger than 400x400mm exceed the rated capacity. Buyers needing support for larger screens or higher weights should verify specifications before purchase.

Movement Range and Clearance

The arm extends from 3.53 inches to 19.51 inches from the wall for flexible positioning. Tilt adjustment spans +5° to -15° while swivel reaches +/-90° for wide viewing angles. Post-installation leveling of +/-3° ensures precise alignment. Premium steel construction provides durability without active cooling or power draw. Noise is limited to mechanical movement during adjustment.

Highlights

  • Comfortable viewing with 3 post-install height levels
  • Fits 26-60 inch TVs up to 77 lbs VESA 400x400
  • Reduce glare with +5°/-15° tilt and ±90° swivel
  • Extend 19.51 out or retract to 3.53 for space
  • Premium steel build with security lock screws

Specifications

Mount StyleWall Mount

Questions about this item

Will the 400x400 VESA plate on this mount fit the same holes as my current bracket?

Yes, the mount supports VESA patterns from 100x100 mm up to 400x400 mm, so it will match the same hole spacing if your existing TV uses that standard.

How can I confirm the arm moves smoothly through the full +5°/-15° tilt and ±90° swivel range after mounting?

After installation, gently push the screen to each tilt stop and rotate it fully left and right; the motion should feel consistent with no binding, and the built-in ±3° leveling lets you fine-tune the final position.

Does the package include the lag bolts and concrete anchors needed for a brick wall, or must I buy them separately?

The box contains the mounting hardware and a step-by-step instruction manual; lag bolts or masonry anchors for brick are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.