ETopSell
ETopSell Mini SAS 36 Pin SFF-8087 to 4x SFF-8482 3.3 FT sas cable
Internal Mini SAS 36-pin SFF-8087 to four SFF-8482 connectors with SATA power, 3.3 ft, 6 Gbps
Length 1 Meter
- 0.5m
- 1 Meter
- Connects one controller to four drives
- SFF-8087 host to four SFF-8482 targets
- Supports 6 Gbps SAS data transfer
- Includes SATA power for drive operation
- 3 ft length for internal routing
Connectivity Overview
This ETopSell cable links a Mini SAS 36 pin SFF-8087 controller to four SFF-8482 drives. It suits builders adding SAS or SATA storage to a host bus adapter or RAID card. The 3.3 FT length fits typical server or workstation chassis. Buyers needing external ports or different connector counts should look elsewhere.
Build Integration
The fan-out design splits one 36 pin host connection into four 29 pin target connectors. A SATA power lead is included to supply the attached drives. The 30.0 gauge wiring supports the stated 6 Gigabits Per Second data rate. Systems without a compatible SFF-8087 port cannot use this cable.
Thermals and Power
Passive copper construction adds no active cooling requirement and produces no audible noise. Power for the drives comes through the separate SATA power connector, not the data lines. The cable draws negligible power itself and does not affect system thermal budgets. Normal use stays within the rated signal integrity limits.
Highlights
- Connects one controller to four drives
- SFF-8087 host to four SFF-8482 targets
- Supports 6 Gbps SAS data transfer
- Includes SATA power for drive operation
- 3 ft length for internal routing
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
ETopSell Mini SAS 36Pin SFF-8087 Male to 4 SATA 7Pin Female Cable 1M
ETopSell Mini SAS SFF-8087 to 4x SFF-8482 Cable with SATA Power 0.5m
Questions about this item
What is the maximum data transfer rate this Mini SAS cable supports?
The cable is rated for a data transfer rate of 6 Gigabits Per Second.
What gauge wire is used in this 3.3 FT cable?
This cable uses 30.0 gauge wire for the internal connections.
What type of controller connector does this cable require?
The cable requires a controller with a Mini SAS 36 pin SFF-8087 connector.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








