We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ESTONE USB 3.0 to SATA adapter cable with 12V 2A power adapter

ESTONE

ESTONE USB 3.0 to SATA Hard Drive Adapter with 12V 2A Power Adapter

SKU CH-SYNN-PWDG6

Connect a 2.5" or 3.5" SATA SSD or HDD via USB 3.0 with UASP for up to 70% faster read and 40% faster write speeds, powered by an included 12V 2A adapter

  • Changer TypeUSB to SATA
  • Connect a 2.5 or 3.5 SATA drive to USB for extra storage
  • Transfer data up to 70 percent faster with UASP support
  • Power 3.5 inch drives reliably using the included 12V 2A adapter
  • Achieve 5Gbps throughput over USB 3.0 for quick backups
  • Works with Windows 8, Mac OS X 10.8 and Linux systems

USB 3.0 SATA Adapter for 2.5 and 3.5 Drives

This adapter connects a 2.5" or 3.5" SATA SSD or HDD to a USB 3.0 port. It includes a 12V 2A power adapter for 3.5" drives. The device supports UASP for faster transfers on compatible systems. It suits data recovery, backups, and adding external storage to a laptop.

Who Should Use This Adapter

It fits users with spare SATA drives who need quick USB access for cloning or file retrieval. It is not for M.2 or PCIe drives. Buyers whose computers lack USB 3.0 will not reach the stated speeds. Systems without UASP support see lower performance.

5 Gbps USB 3.0 With UASP Support

The interface runs at 5 Gbps and supports UASP on Windows 8, Mac OS X 10.8 or above, and Linux. UASP can deliver 70% faster reads and 40% faster writes over standard USB 3.0. This spec decides if the adapter matches the drive and host capabilities.

Highlights

  • Connect a 2.5 or 3.5 SATA drive to USB for extra storage
  • Transfer data up to 70 percent faster with UASP support
  • Power 3.5 inch drives reliably using the included 12V 2A adapter
  • Achieve 5Gbps throughput over USB 3.0 for quick backups
  • Works with Windows 8, Mac OS X 10.8 and Linux systems

Specifications

Changer TypeUSB to SATA
ModelStandard

Questions about this item

How do I install the ESTONE USB 3.0 to SATA adapter and what step is often missed?

Connect the SATA data and power cables to your 2.5 or 3.5 drive, attach the 12V 2A power adapter to the adapter unit, then plug the USB 3.0 cable into the computer. The step often missed is applying the 12V power before the USB link; without it a 3.5 drive will not spin up.

What maintenance or replacement will this adapter need later?

No scheduled maintenance is required. The USB 3.0 plug and SATA connectors are rated for thousands of cycles. If the 12V 2A power adapter fails, replace it with a unit that delivers 12V at 2A; the adapter itself has no user-serviceable parts.

What limit appears first under sustained heavy transfers?

The USB 3.0 5Gbps interface is the bottleneck. With UASP enabled on Windows 8, Mac OS X 10.8 or above, or Linux, peak read reaches 70% faster and write 40% faster than standard USB 3.0, but the bus ceiling remains 5Gbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.