We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RJ45 splitter with two female ports and a 1.2m USB power cable

ESTONE

ESTONE RJ45 1 to 2 Network Splitter Adapter USB Power Cable 1.2m 100Mbps Black

SKU CH-E8XX-1A7R0

A 1-to-2 RJ45 splitter with a 1.2 m USB power cable lets two devices share one Ethernet line at 100 Mbps each

  • Type1 to 2 RJ45 Network Splitter Adapter
  • Package Contents1 X RJ45 Network Splitter Adapter
  • Splits one Ethernet cable into two active ports using USB power
  • 2 m USB cable supplies power for simultaneous dual-device operation
  • Gold-plated RJ45 pins on thick PCB deliver stable 100 Mbps per port
  • Compact PVC housing with 0.75 m USB lead fits tight spaces
  • Works with Cat5 through Cat7 cables for router, PC or TV connections

Simple RJ45 Splitter with USB Power

This ESTONE adapter divides one Ethernet cable into two female RJ45 ports using a physical tapping method. A 1.2 m USB cable supplies the power needed for simultaneous operation. The gold-plated 8P8C contacts sit on an integrated PCB inside a black PVC housing. It is intended for Cat5 through Cat7 cabling.

Suits temporary dual-device sharing

Home users who need a second wired connection in another room without running new cable can use this splitter. It supports two computers online at the same time at 100 Mbps each. Builders who need full gigabit throughput on both links, or who require Power over Ethernet pass-through, should look at an active switch instead.

100 Mbps per port limit

Each of the two output ports is capped at 100 Mbps because the adapter splits the four twisted pairs into two separate 100BASE-TX channels. This ceiling is set by the physical wiring scheme, not by negotiation. If your workflow demands higher sustained bandwidth on either port, this device will not meet that need.

Highlights

  • Splits one Ethernet cable into two active ports using USB power
  • 2 m USB cable supplies power for simultaneous dual-device operation
  • Gold-plated RJ45 pins on thick PCB deliver stable 100 Mbps per port
  • Compact PVC housing with 0.75 m USB lead fits tight spaces
  • Works with Cat5 through Cat7 cables for router, PC or TV connections

Specifications

Type1 to 2 RJ45 Network Splitter Adapter
Package Contents1 X RJ45 Network Splitter Adapter

Questions about this item

What must I already have to use this splitter?

You need a single Ethernet cable running from your router or switch and a free USB-A port to power the adapter.

Can I keep my existing Cat5e and Cat6 cables and still get a connection?

Yes, the splitter works with Cat5, Cat5e, Cat6 and Cat7 cables; each linked device will run at up to 100 Mbps.

How do I confirm both ports are active after plugging everything in?

Connect the USB power cable, then check that both linked computers show a 100 Mbps link light and can access the network simultaneously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.