We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RJ45 splitter with two female ports and USB power cable

ESTONE

ESTONE RJ45 1 to 2 Network Splitter Adapter 0.75m USB Power Cable Black

SKU CH-8X9J-GGNMD

Splits one Ethernet cable into two simultaneous 100 Mbps connections using a 0.75 m USB power cable

  • Type1 to 2 RJ45 Network Splitter Adapter
  • Package Contents1 X RJ45 Network Splitter Adapter
  • Share one Ethernet line between two devices simultaneously
  • USB powered with 0.75 m cable for stable operation
  • Gold-plated RJ45 pins ensure reliable signal transfer
  • Each output delivers up to 100 Mbps throughput
  • Built-in PCB board provides consistent transmission quality

Simple RJ45 Splitter for Shared Ethernet Access

This ESTONE adapter divides a single RJ45 connection into two female ports so two devices can share one wired line. It suits home or small-office users who need simultaneous network access without running extra cables. The splitter draws power from an included USB cable and works with Cat5e, Cat6 and Cat7 patch leads. It is not for buyers who require gigabit throughput on both ports.

Thermals Noise and Power in Normal Use

The unit has no fan or active cooling, so it runs silently and adds negligible heat to the setup. Power is supplied entirely through the 0.75 m USB lead, drawing only the small current needed for the internal PCB and gold-plated contacts. No external mains adapter is required, keeping desk clutter low. It is not for users who need a completely passive, unpowered coupler.

Bundled USB Cable Enables Simultaneous Operation

A 1.2 m USB power cable is included and must be connected for the two RJ45 ports to work at the same time. Without that link the splitter cannot maintain the 100 Mbps signal on each output. The cable length gives enough reach for nearby USB ports on a router, PC or charger. It is not for buyers who want a splitter that functions without any external power source.

Highlights

  • Share one Ethernet line between two devices simultaneously
  • USB powered with 0.75 m cable for stable operation
  • Gold-plated RJ45 pins ensure reliable signal transfer
  • Each output delivers up to 100 Mbps throughput
  • Built-in PCB board provides consistent transmission quality

Specifications

Type1 to 2 RJ45 Network Splitter Adapter
Package Contents1 X RJ45 Network Splitter Adapter

Questions about this item

How do I install the ESTONE RJ45 1 to 2 Network Splitter Adapter and what is the step people often miss?

Connect the single RJ45 male plug to your wall jack or router, plug both Ethernet cables into the two female ports, then attach the 0.75m USB power cable to a powered USB port; the splitter will not work without this USB connection.

What maintenance or replacement will the ESTONE RJ45 1 to 2 Network Splitter Adapter need later?

The gold-plated pins and PVC housing are passive components with no moving parts, so no scheduled maintenance is required; replace the unit only if the USB cable is damaged or the ports become loose.

What limit appears first when the ESTONE RJ45 1 to 2 Network Splitter Adapter is used continuously?

Each of the two output ports is capped at 100Mbps, so sustained transfers will hit that bandwidth ceiling long before the PCB or gold-plated contacts show any degradation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.