We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RJ45 1-to-2 splitter adapter with gold-plated pins and 0.75 m USB power cable

ESTONE

ESTONE RJ45 1 to 2 Network Splitter Adapter 0.75m USB Power Cable

SKU CH-3JRZ-823HP

Splits one Ethernet cable into two 100 Mbps ports with a 0.75 m USB power cable

  • Type1 to 2 RJ45 Network Splitter Adapter
  • Package Contents1 X RJ45 Network Splitter Adapter
  • Share one Ethernet line with two devices simultaneously via USB-powered splitter
  • 75 m USB cable powers the adapter for stable dual-port operation
  • Gold-plated 8P8C pins ensure reliable signal transmission up to 100 Mbps per port
  • Built-in PCB board with integrated welding reduces interference between the two cable groups
  • Compatible with Cat5, Cat5e, Cat6 and Cat7 cables for flexible networking

What this adapter does

The ESTONE RJ45 splitter turns one Ethernet cable into two female ports so two devices can share a single wired connection. A 0.75 m USB power cable is included and must be connected for the adapter to work. Gold-plated pins and a built-in PCB aim to keep the signal stable. The housing is black PVC.

Check before you buy

Your incoming cable must be Cat5, Cat5e, Cat6 or Cat7 and terminated with an 8P8C plug. Each of the two output ports is limited to 100 Mbps, so gigabit or faster links will not be supported. A free USB-A port or charger is required to supply power; the adapter cannot operate without it. The USB lead is 1.2 m long according to the supplier note.

What the bundle changes

The supplied USB power cable lets the splitter run without a separate mains adapter, drawing current from a laptop, router or wall charger. Because the cable is 1.2 m long, you can place the splitter farther from the power source than the 0.75 m figure might suggest. No driver disc or configuration software is included; the device is passive once powered.

Highlights

  • Share one Ethernet line with two devices simultaneously via USB-powered splitter
  • 75 m USB cable powers the adapter for stable dual-port operation
  • Gold-plated 8P8C pins ensure reliable signal transmission up to 100 Mbps per port
  • Built-in PCB board with integrated welding reduces interference between the two cable groups
  • Compatible with Cat5, Cat5e, Cat6 and Cat7 cables for flexible networking

Specifications

Type1 to 2 RJ45 Network Splitter Adapter
Package Contents1 X RJ45 Network Splitter Adapter

Questions about this item

What comes in the box and do I need any extra cables?

The package contains one RJ45 1-to-2 splitter adapter with a 0.75 m USB power cable. You must supply two Ethernet cables (Cat5, Cat5e, Cat6 or Cat7) to connect your devices.

Which version should I choose for my Cat6 wiring?

This single model works with Cat5, Cat5e, Cat6 and Cat7 cables, so no separate version is required for Cat6 installations.

What speed will each connected device actually get?

Each of the two ports delivers up to 100 Mbps when the USB power cable is connected, allowing two computers to share one Ethernet line simultaneously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.