We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black HDMI audio extractor with HDMI, optical and RCA outputs, 5-inch cable

ESTONE

ESTONE HY-5001 4K HDMI Audio Extractor 2.0 5.1 1080

SKU CH-4NVR-E75BS

Extracts audio from HDMI sources to optical and RCA outputs while passing 1080p video with 2.0 and 5.1 channel options

  • TypeAudio Splitters
  • Changer TypeHDMI Switch/Extender
  • Ports2
  • AudioYes
  • ColorBlack
  • Cable Length5 in.
  • Extracts audio from HDMI to optical and RCA outputs
  • Pass-through video up to 1920 x 1080 resolution
  • Three audio modes: 2.0, 5.1 or pass-through
  • Works with consoles, streamers and Blu-ray players
  • Includes 5V power adapter and user manual

What it does and who needs it

The ESTONE HY-5001 extracts audio from an HDMI source and sends it to separate optical Toslink and RCA stereo outputs while passing the video signal onward. It suits anyone connecting a Blu-ray player, games console or streaming stick to a display that lacks audio outputs or to an older amplifier without HDMI inputs.

Replaces direct HDMI audio when the display cannot

Use this extractor when your TV or projector only accepts stereo PCM but the source outputs multichannel sound, or when you need to feed a legacy AV receiver that has only optical or analogue inputs. The jump is worth it if you hear missing channels, downmix artefacts or get no sound at all from the current direct connection.

Plug in power, connect cables, select the audio mode

Installation needs only the supplied 5 V adapter, an HDMI cable from the source and the desired audio cables to your sound system. A three-position switch chooses Pass-through, 2.0 CH or 5.1 CH; the most common issue is leaving the switch on Pass-through when the downstream device cannot handle the source’s native format, which results in silence or noise.

Highlights

  • Extracts audio from HDMI to optical and RCA outputs
  • Pass-through video up to 1920 x 1080 resolution
  • Three audio modes: 2.0, 5.1 or pass-through
  • Works with consoles, streamers and Blu-ray players
  • Includes 5V power adapter and user manual

Specifications

BrandESTONE
ModelHY-5001
TypeAudio Splitters
Changer TypeHDMI Switch/Extender
Ports2
AudioYes
ColorBlack
Cable Length5 in.
Input Connector1x HDMI female
Output Connector4x Toslink
Connector StyleStandard
Maximum Resolutions1920 x 1080
Package Contents1x 4K HDMI Audio Extractor Converter
1x 5V Power Adapter
1x User Manual

Questions about this item

Does the 5 in cable reach from my TV to the extractor?

The included 5 in cable connects the extractor to the source device; you will need your own HDMI cable from the extractor to the TV.

Which of the three audio mode switches — PASS, 2.0CH, 5.1CH — should I choose for a soundbar?

Set the switch to 2.0CH for stereo soundbars; use 5.1CH only if your sound system decodes surround formats.

Will the 5V power adapter need replacing after a few years?

The 5V adapter is a standard barrel-type supply; replace it only if the unit loses power or the LED stays off.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.