We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with HDMI, optical and RCA ports, short cable attached

ESTONE

ESTONE HY-5001 1080P HDMI Audio Extractor

SKU CH-N5R8-6XMGC

Splits one HDMI source into HDMI video plus optical Toslink and stereo RCA audio with selectable 2.0 or 5.1 channel output up to 1080p

  • TypeAudio Splitters
  • Changer TypeHDMI Switch/Extender
  • Ports2
  • AudioYes
  • ColorBlack
  • Cable Length5 in.
  • Extracts audio to optical Toslink and analog RCA from HDMI
  • Passes 1080p video to display while splitting sound
  • Selectable 2.0 or 5.1 channel audio output modes
  • Works with consoles, streamers, PCs and Blu-ray players
  • Includes 5V power adapter and user manual for setup

ESTONE HY-5001 HDMI Audio Extractor

This ESTONE HY-5001 extracts audio from an HDMI source and delivers it through optical Toslink and RCA stereo outputs while passing video to a display. It suits installers who need to separate sound for a legacy amplifier or active speakers without replacing the source device. The compact black unit accepts 1080p signals from players, consoles or streaming sticks and requires external 5 V power.

Sustained signal handling

The converter maintains synchronous separation of video and audio during continuous playback with no reported signal loss. Three selectable audio modes — PASS, 2.0CH and 5.1CH — let the installer match the downstream equipment without reconfiguration mid-session. The short 5-inch pigtail keeps the signal path tidy in a rack or behind a display.

Installation notes

Connect the source to the single HDMI input, attach the display to the HDMI output, then route optical or RCA cables to the audio system. Select the correct audio mode for the connected gear; an incorrect PASS/2.0CH/5.1CH setting is the most common cause of silent or distorted output. The included 5 V adapter and manual complete the setup.

Highlights

  • Extracts audio to optical Toslink and analog RCA from HDMI
  • Passes 1080p video to display while splitting sound
  • Selectable 2.0 or 5.1 channel audio output modes
  • Works with consoles, streamers, PCs and Blu-ray players
  • Includes 5V power adapter and user manual for setup

Specifications

BrandESTONE
ModelHY-5001
TypeAudio Splitters
Changer TypeHDMI Switch/Extender
Ports2
AudioYes
ColorBlack
Cable Length5 in.
Input Connector1x HDMI female
Output Connector4x Toslink
Connector StyleStandard
Maximum Resolutions1920 x 1080
Package Contents1x 4K HDMI Audio Extractor Converter
1x 5V Power Adapter
1x User Manual

Questions about this item

Does the ESTONE HY-5001 run hot or make noise when left on all day?

The extractor has no fan and draws only 5 V from the included adapter, so it stays cool and silent during continuous use.

What cables or sources must I already own to use the HY-5001?

You need an HDMI source such as a Blu-ray player, console or streaming stick, plus an HDMI display and either an optical Toslink or RCA stereo cable for the audio output you want.

Will the HY-5001 pass 1080p video to my older 1920 x 1080 monitor while sending 5.1 audio to my legacy AV receiver?

Yes, the HDMI output delivers 1080p video unchanged and the audio mode switch lets you select 5.1 CH for the optical Toslink feed to older surround gear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.