We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver DisplayPort 1.4 cable with male connectors on both ends, 3.3 ft long

ESTONE

ESTONE DP28 DisplayPort 1.4 cable 3.3 ft Silver

SKU CH-DC09-W9EEA

A 3.3 ft DisplayPort 1.4 cable supporting 32.4 Gbps bandwidth for 8K@60Hz, 4K@144Hz and 2K@240Hz with HDR10 and DSC 1.2

  • TypeDisplayPort
  • ColorSilver
  • Length3.3 ft.
  • Cable Length3.3 ft.
  • Connector Number1
  • Connect From1 x DisplayPort 1.4
  • Smooth 8K gaming at 60 Hz with 32.4 Gbps bandwidth
  • High-refresh 4K at 144 Hz and 2K at 240 Hz for competitive play
  • Tinned copper conductors and triple shielding keep signals stable
  • Gold-plated connectors resist corrosion for lasting conductivity
  • Nylon braid rated for 30000 bends withstands daily routing

8K DisplayPort 1.4 cable for high-refresh gaming

This 3.3 ft ESTONE DP28 cable links a DisplayPort 1.4 source to a DisplayPort 1.4 display with male-to-male connectors. It is built for gamers and creators who need 8K at 60 Hz, 4K at 144 Hz or 2K at 240 Hz from a single cable. The silver braided jacket and gold-plated ends suit desktop setups where a one-metre reach is enough.

Sustained 32.4 Gbps throughput with HBR3 and DSC 1.2

The cable maintains the full 32.4 Gbps bandwidth required for uncompressed 8K 60 Hz or compressed 4K 144 Hz signals over its entire length. Triple-layer shielding around 28 AWG tinned copper conductors suppresses interference during long sessions. The construction is rated for 30000 bend cycles, so repeated routing behind a desk does not degrade signal integrity.

3.3 ft length decides fit for close-range desktop

At 3.3 ft the cable reaches monitors placed directly beside a graphics card but cannot span larger gaps or route through cable-management channels that demand extra slack. Buyers needing a longer run for wall-mounted screens or multi-desk layouts should choose a different length.

Highlights

  • Smooth 8K gaming at 60 Hz with 32.4 Gbps bandwidth
  • High-refresh 4K at 144 Hz and 2K at 240 Hz for competitive play
  • Tinned copper conductors and triple shielding keep signals stable
  • Gold-plated connectors resist corrosion for lasting conductivity
  • Nylon braid rated for 30000 bends withstands daily routing

Specifications

BrandESTONE
ModelDP28
TypeDisplayPort
ColorSilver
Length3.3 ft.
Cable Length3.3 ft.
Connector Number1
Connect From1 x DisplayPort 1.4
Connect To1 x DisplayPort 1.4
Connector DetailDisplayPort to DisplayPort( Male to Male)
Terminal GenderMale to Male
SpeedSupports up to 32.4Gbps bandwidth.
SpecificationsBandwidth: 32.4Gbps
Refresh Rate: 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz
HDCP 2.2, HDCP 1.4, HDR.. Backward compatible with DisplayPort 1.3/1.2.
Dynamic HDR, Multi-Screen Display
Conductor Material : 28AWG Tinned Copper
Supports BT601, BT709, BT2020, Adobe RGB Color Format
Refresh Rate8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz
Features8K DisplayPort Cable 1.4 4K 144Hz 2K 240Hz
About Brand Silkland: [Officially Certified VESA Member]
Supports 8K@60Hz, 2K@240Hz, 4K@144Hz, 4K@60Hz, 5K@60Hz, 2K@165Hz, 1080P@240Hz, HDCP 2.2/1.4 and HDR
HBR3 Rated, supports transmission speed up to 32.4Gbps
Display Stream Compression 1.2(DSC), FEC forward error correction, and 32 audio channels
HBR3 rated - Backward compatible with DisplayPort 1.3/1.2/1.1

Questions about this item

Will the 28AWG tinned copper conductors and triple-layer shielding keep the cable cool during all-day 8K@60Hz use?

The passive 28AWG tinned copper design with triple-layer shielding carries the 32.4Gbps HBR3 signal without active electronics, so it produces no heat of its own during continuous 8K@60Hz operation.

Which ports must my graphics card and monitor already provide for this male-to-male DisplayPort 1.4 cable to work?

Both the source and the display need a standard DisplayPort 1.4 (or 1.3/1.2) female connector; the cable plugs directly into each with its gold-plated male ends.

If I keep a DisplayPort 1.2 monitor, will the 32.4Gbps cable still deliver 4K@60Hz without signal loss?

Yes, the cable is backward compatible with DisplayPort 1.2 and 1.3, so it will reliably carry 4K@60Hz and lower resolutions on older monitors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.