We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ericson

Ericson 2610-CW6P-AM 125V 30A L5-30R straight blade plug

SKU CH-N7VZ-PCFXT

A watertight industrial plug rated 30 A at 125 V AC with an L5-30R configuration, antimicrobial housing and a cord range of .470 to .720 in

  • MaterialHAWA
  • TypeDisconnect Terminal & Tab Electrical Connectors
  • Industrial-grade 30 A 125 V AC power connection
  • Watertight shrouded L5-30R locking plug for wet environments
  • Antimicrobial yellow housing resists bacterial growth on surface
  • Accepts cord diameters from .470 in to .720 in
  • Rated for 2.0 HP single-phase motor loads

Industrial-grade power connection

The Ericson 2610-CW6P-AM is a straight-blade plug rated for 30 A at 125 V AC. It uses an L5-30R NEMA configuration with two poles and three wires. The yellow shrouded housing suits industrial environments where secure single-phase connections are required.

Watertight seal manages heat and ingress

A watertight locking design keeps moisture and debris out of the contact area during normal operation. The antimicrobial HAWA material resists surface growth without added corrosion-resistant coating. The plug accepts cord diameters from .470 in to .720 in for a tight gland seal.

Fits standard 30 A inlets and frees panel space

The L5-30R blade pattern mates with matching industrial receptacles on generators, distribution boxes or equipment panels. Shrouded contacts reduce accidental touch risk in tight cabinets. Rated for 2.0 HP loads, it supports motor-start duty without needing an oversized inlet.

Highlights

  • Industrial-grade 30 A 125 V AC power connection
  • Watertight shrouded L5-30R locking plug for wet environments
  • Antimicrobial yellow housing resists bacterial growth on surface
  • Accepts cord diameters from .470 in to .720 in
  • Rated for 2.0 HP single-phase motor loads

Specifications

BrandEricson
MaterialHAWA
TypeDisconnect Terminal & Tab Electrical Connectors

Questions about this item

How do I wire the L5-30R plug and what cord diameter fits the clamp?

Strip each conductor, insert into the disconnect terminals, tighten the set screws, then secure the cable clamp around the jacket; the clamp accepts 0.470 in to 0.720 in outer diameter.

What parts will need replacement after extended service?

The brass terminals and yellow HAWA housing are built for industrial duty; only the plug itself would be replaced if the shroud cracks or the antimicrobial coating wears away.

At what load does the 30 A rating become the limiting factor?

Continuous draws above 30 A at 125 V AC will trip the upstream breaker; the plug is rated for 2.0 HP motor loads, so sustained current near 30 A is the practical ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.