We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular network adapter with matte black finish and Ethernet ports

EnGenius Technologies

EnGenius Technologies EPA5060XBT 60W 10GbE PoE++ Adapter

SKU CH-0M7W-H5WHV

A 60 W single-port PoE++ adapter delivering up to 10 GbE over four pairs with auto-detection and silent fan-less operation

  • Delivers up to 60 W over four pairs with auto-detection
  • Powers 10 GbE devices through a single cable without extra wiring
  • Silent fan-less design keeps noise out of quiet spaces
  • Works with 802.3af/at legacy gear and 802.3bt Type 3 equipment
  • Plug-and-play setup needs no software or configuration

EnGenius EPA5060XBT PoE++ Adapter

The EnGenius EPA5060XBT is a single-port Power over Ethernet adapter compliant with IEEE 802.3bt Type 3. It supplies up to 60 W to compatible devices while passing data at speeds up to 10 GbE. The fan-less design ensures silent operation and the unit installs with a simple plug-and-play setup.

Suitable Applications and Limitations

This adapter suits installers powering high-draw devices such as 10 GbE access points or PTZ cameras over a single cable run. It is backward compatible with legacy 802.3af and 802.3at equipment. Buyers needing multi-port power distribution or devices requiring more than 60 W should look at alternative solutions.

Deciding Specification

The key specification is the 60 W power budget delivered under the IEEE 802.3bt Type 3 standard. Verify that the powered device draws within this limit and negotiates the correct class before purchasing.

Highlights

  • Delivers up to 60 W over four pairs with auto-detection
  • Powers 10 GbE devices through a single cable without extra wiring
  • Silent fan-less design keeps noise out of quiet spaces
  • Works with 802.3af/at legacy gear and 802.3bt Type 3 equipment
  • Plug-and-play setup needs no software or configuration

Specifications

No published specifications for this item yet.

Questions about this item

Does the fan-less EPA5060XBT stay quiet and cool when it delivers 60 W continuously?

The adapter uses a fan-less design for silent operation and is rated to supply up to 60 W over four pairs with auto-detection of the connected device's power needs.

What cabling and network gear must I already have to use this 10 GbE PoE++ adapter?

You need Category 6a or better Ethernet cable, a 10 GbE switch or NIC port, and a powered device that accepts IEEE 802.3bt Type 3 or the older 802.3af/at standards.

Will this 10 GbE adapter work with my existing 1 Gbps and 2.5 Gbps PoE devices?

Yes, the port negotiates 10, 100, 1000 Mbps and 1 Gb, 2.5 Gb, 10 Gb speeds while remaining backward compatible with legacy PoE and 802.3af/at equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.