We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold RJ45 plugs with brass shells and 1.30mm apertures

Enfain

Enfain NW193 RJ45 Cat7 connectors 10 pack 50U gold 1.30mm aperture

SKU CH-74BT-1XQF1

Shielded Cat7 RJ45 connectors with 50U gold contacts and 1.30mm aperture for 10-gigabit networks

Style 100 Packs

  • 10 connectors ready for 10-gigabit networks
  • 50U gold plating resists corrosion on every contact
  • Three-prong contacts grip solid and stranded wire
  • 30 mm aperture fits standard Cat7 cable
  • Brass shell shields signal from interference

Engineering-grade Cat7 RJ45 plugs

These UGREEN NW193 connectors are built for installers and network engineers terminating shielded Category 7 cable for 10-gigabit links. The brass shell and three-prong contact design suit professional patch-panel and field-termination work where reliable throughput matters.

Brass shell and 50U gold contacts

A brass housing provides mechanical rigidity while 50-micron gold plating on the contact copper sheets resists oxidation over repeated mating cycles. The 1.30 mm conductor aperture accepts solid or stranded cores typical of Cat7 installation cable, and the shielded RJ45 interface maintains grounding continuity through the connector body.

10-pack limits project scale

Supplied in a 10-piece pack, the quantity covers a single small cabinet or a handful of wall outlets but falls short for larger structured-cabling jobs. Buyers wiring full floors or data-centre rows will need multiple packs, and the Category 7 rating does not extend performance beyond the 10-gigabit standard the connectors are designed for.

Highlights

  • 10 connectors ready for 10-gigabit networks
  • 50U gold plating resists corrosion on every contact
  • Three-prong contacts grip solid and stranded wire
  • 30 mm aperture fits standard Cat7 cable
  • Brass shell shields signal from interference

Specifications

No published specifications for this item yet.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What cable diameter does the 1.30 mm aperture accept?

The 1.30 mm aperture fits conductors up to that diameter, matching typical Cat7 solid-core wires.

What tool and contact type are required for the three-pronged contacts?

Use a standard RJ45 crimp tool; the three-pronged contacts pierce the insulation on each conductor when fully seated.

Does the brass shell connect to the cable shield for Cat7 grounding?

Yes, the brass shell provides the shield connection when the cable’s foil and drain wire are folded back under the crimp ferrule.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.