We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold RJ45 plugs with brass shells and 1.30 mm apertures

Enfain

Enfain NW193 RJ45 Cat 7 10G 50U gold 1.30mm 10-pack

SKU CH-KKN0-PQX0B

A 10-pack of RJ45 Cat 7 connectors with 50U gold plating and 1.30mm aperture for 10-gigabit networks

Style 10 Packs

  • Engineering-grade connectors support 10-gigabit network speeds
  • 50U gold plating ensures reliable signal transmission
  • Three-pronged contacts grip conductors securely
  • Brass shell provides durable shielding
  • 30mm aperture fits standard solid wires

Enfain NW193 RJ45 Cat 7 Connectors

These RJ45 connectors are designed for Category 7 cabling in 10-gigabit networks. They suit installers and network engineers terminating shielded twisted-pair cable for high-speed links. The pack contains ten pieces for multiple drops or patch-cord assembly. Gold-plated contacts and a brass shell provide durable, low-resistance connections.

10-Pack Capacity and Termination Headroom

Ten connectors support up to ten cable ends, enough for five full patch cords or a mix of wall plates and equipment cords. The 1.30 mm aperture accepts standard solid or stranded conductors used in Cat 7 installations. The three-pronged contact design grips each wire securely, but the set runs out once all ten ends are terminated.

RJ45 Interface Practical Limits

The RJ45 interface carries the 10-gigabit signal over four shielded pairs up to the standard channel distance. Performance depends on cable quality, termination craft and alien-crosstalk environment. These plugs do not compensate for poor cable or excessive untwist at the termination point. They are rated for the Cat 7 standard and 50U gold plating thickness.

Highlights

  • Engineering-grade connectors support 10-gigabit network speeds
  • 50U gold plating ensures reliable signal transmission
  • Three-pronged contacts grip conductors securely
  • Brass shell provides durable shielding
  • 30mm aperture fits standard solid wires

Specifications

No published specifications for this item yet.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1.30 mm aperture RJ45 plugs fit the Cat 6 cables I already have?

The 1.30 mm aperture is sized for Cat 7 conductors; Cat 6 wires are typically thinner so the three-pronged contacts may not grip them reliably.

How can I verify the 50U gold-plated connectors are delivering 10-gigabit performance after crimping?

Run a 10 Gbps link test between two devices; a clean 10 Gbps negotiation with low error counts confirms the 50U gold contacts and three-pronged copper sheets are working.

Does the 10-pack include a crimp tool or only the NW193 brass-shell plugs?

The pack contains ten NW193 RJ45 crystal heads with brass shells; a compatible RJ45 crimp tool must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.