We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40 cm C14 to C13 power cable with 90 degree angled connectors

Enfain

Enfain 90° C13 to C14 extension power cord 40 cm

SKU CH-1YY3-ZR48G

A 40 cm right-angle IEC C14 to C13 extension cord rated 10 A 250 V for tight spaces behind racks or desks

Style Down Angle

  • 90° right-angle connectors fit tight spaces behind racks and desks
  • 40 cm length bridges short gaps between equipment and PDU or UPS
  • IEC C13 female to C14 male plugs extend existing AC power cords
  • Rated 10 A at 250 V for standard desktop and peripheral loads
  • 75 mm² conductors carry rated current without excess voltage drop

90° C13-C14 extension cord

This 40 cm cable connects a C14 inlet to a C13 outlet with a right-angle elbow at the C13 end. It is intended for desktop computers, monitors, printers, projectors and similar mains-powered equipment. The 90° bend lets the plug sit flush against the device so the cord does not protrude into tight rear-panel spaces. Rated at 10 A and 250 V, it suits standard IEC 320 power distribution units and UPS outlets.

Fits tight rear clearances

The right-angle C13 head routes the cable downward, freeing vertical space behind rack cabinets, wall-mounted screens or crowded workstation backs. It plugs directly into any C13 PDU or UPS port and accepts a standard C14 appliance inlet on the other side. No additional adapters are required for typical office or home AV gear that uses the IEC 320 C13/C14 connector pair.

Steady 10 A rating under load

The conductors are sized for continuous 10 A at 250 V, so the cord handles sustained draw from laser printers, large displays or multi-device PDU strips without overheating. The moulded IEC 320 C14 and C13 ends maintain a secure connection during vibration or cable management adjustments. Devices must operate within the supplied mains voltage to avoid damage.

Highlights

  • 90° right-angle connectors fit tight spaces behind racks and desks
  • 40 cm length bridges short gaps between equipment and PDU or UPS
  • IEC C13 female to C14 male plugs extend existing AC power cords
  • Rated 10 A at 250 V for standard desktop and peripheral loads
  • 75 mm² conductors carry rated current without excess voltage drop

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much current can this 40 cm cord carry continuously?

The cord is rated for 10 A at 250 V so it will handle the full rated load of any C13 device within that limit.

Does the 90 ° elbow generate extra heat when the cord runs all day?

The elbow is a passive moulded connector; it adds no active components so heat rise is the same as a straight IEC 320 C13/C14 cable at 10 A.

What equipment must I already have to use this extension?

You need a device with a C14 inlet and a power source with a C13 outlet such as a PDU or UPS.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.