We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey aluminium HDMI 2.1 switch with three inputs and one output

ENBUER 8K HDMI 2.1 Switch 3 In 1 Out Grey

SKU CH-ZBW6-KXM3V

An HDMI 2.1 switch routes three 8K@60 Hz or 4K@240 Hz sources to one display with 48 Gbps bandwidth, VRR, Dolby Vision and IR remote control

  • TypeHDMI
  • Changer TypeHDMI
  • ColorGrey
  • Ports4
  • Input Connector4
  • Maximum Resolutions3x1
  • Switch three sources to one display without unplugging cables
  • 8K at 60 Hz and 4K at 240 Hz via 48 Gbps HDMI 2.1
  • Instant input change by front button or IR remote
  • Aluminium housing delivers zero delay, no flashing or dropouts
  • Plug-and-play with CEC, VRR, Dynamic HDR10+, Dolby Vision and HDCP 2.3

Three-Source HDMI 2.1 Switch

The ENBUER 8K HDMI 2.1 Switch routes three HDMI sources to a single display. It supports 8K at 60 Hz, 4K at 240 Hz and 1080p at 480 Hz with a 48 Gbps bandwidth ceiling. The aluminium chassis houses three inputs and one output, all compliant with HDMI 2.1 and HDCP 2.3. An IR remote and a front button give instant input selection.

Build Integration

Connect up to three devices such as a PS5, Xbox or Blu-ray player to the three HDMI inputs, then run one cable to the TV or monitor. The switch draws power from a USB-A 5 V 1 A adapter via a Type-C port when source power is insufficient. CEC pass-through lets the display remote control connected gear. No drivers or software are required.

Thermals Noise Power

Passive aluminium construction means zero fan noise and no moving parts. The unit weighs 0.2 kg and runs cool during typical 8K or high-refresh 4K sessions. Power draw is limited to the 5 V 1 A external supply, so it adds negligible load to a power strip. The LED indicator shows the active port without generating measurable heat.

Highlights

  • Switch three sources to one display without unplugging cables
  • 8K at 60 Hz and 4K at 240 Hz via 48 Gbps HDMI 2.1
  • Instant input change by front button or IR remote
  • Aluminium housing delivers zero delay, no flashing or dropouts
  • Plug-and-play with CEC, VRR, Dynamic HDR10+, Dolby Vision and HDCP 2.3

Specifications

BrandENBUER
Part Number8K HDMI 2.1 Switch
TypeHDMI
Changer TypeHDMI
ColorGrey
Ports4
Input Connector4
Maximum Resolutions3x1
Weight0.2 kilograms

Questions about this item

How far can I run the HDMI cables at 8K@60Hz without signal loss?

The manufacturer recommends keeping both the input and output HDMI cables at 3 metres or less for reliable 8K@60Hz transmission.

Does the switch need external power when running all three sources continuously?

A USB-A 5V/1A adapter is included; use it if the HDMI source ports cannot supply enough power for stable operation.

What cables and power supply must I provide myself to use this switch?

You need three HDMI 2.1 cables for the sources, one HDMI 2.1 cable for the display, and a USB-A 5V/1A charger if the sources do not deliver sufficient power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.