Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Connects a 2.5" SATA SSD or HDD to a USB 3.1 Type A port at up to 10 Gbps with UASP support, powered by the USB bus and including a 12 V input for 3.5" drives
The EN-Labs adapter cable connects a 2.5 inch SATA solid-state or hard drive to a USB 3.1 Type A port using the ASMT1351 chipset. Power is drawn from the USB 5 V bus, so no external supply is needed for 2.5 inch units. The cable length is 60 cm and the connector on the drive side is a 22 pin SATA interface.
This adapter is intended for laptop owners or desktop users who want quick external access to one 2.5 inch SATA SSD or HDD. UASP support enables faster transfers when the host controller also supports the protocol. Builders who need to power a 3.5 inch drive must supply their own 12 V 2 A adapter, which is not included.
The decisive detail is the 22 pin SATA connector paired with USB 3.1 Gen 2 10 Gbps signalling, which only fits 2.5 inch SATA drives directly. If your drive uses a different interface or you require power for a 3.5 inch unit without a separate adapter, this cable will not work.
| Type | USB to SATA |
|---|---|
| Specifications | Type: USB 3.1 Type A to SATA III 6Gpbs Adapter,with UASP supports Data Rate: Support USB 3.1 10Gbps & SATA III 6Gbps Chipset:ASMT1351 |
| Connector A | USB 3.1 Type A |
| Connector B | SATA 22pin |
| Features | Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 (10 Gbps) ultra-portable adapter cable, powered by USB 5V Vbus 12V/2A extra power adapter is needed when use with 3.5" SSD/HDD, power adapter does not include. USB 3.1 Gen 2 high-speed supports up to 10Gbps data rate Supports SATA III (6 Gbps),backward SATA I(1.5Gbps) and SATAIII (3Gbps) Powered directly from the USB port 2.5" HDD Supports UASP, allowing for faster transfer speeds than traditional USB 3.0 when paired with a UASP-enabled host controller Backward compatible with USB 3.0, 2.0 and 1.0 |
| Package Contents | USB to SATA Adapter, Black White Color USB A Male to Male Cable,60cm / 2ft |
A 2.5-inch SATA SSD or HDD draws power from the USB 5 V bus, so no 12 V adapter is required.
Yes, the adapter is backward compatible with SATA I 1.5 Gbps and SATA II 3 Gbps drives, so the drive will operate at its rated speed.
In Windows Device Manager check the driver name — it should list "USB Attached SCSI (UASP)" instead of the older USB Mass Storage driver.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?