EN-Labs
EN-Labs USB 3.0 to SATA 2.5" SSD Adapter with UASP and Reserved USB Power Cable
Connects a 2.5" SATA SSD or HDD to a USB 3.0 port with UASP support and a reserved USB 2.0 power cable
- TypeUSB to SATA
- SpecificationsType: USB 3.0 Type A to SATA III 6Gpbs Adapter,with UASP sup
- Connector AUSB 3.0+USB 2.0
- Connector BSATA 22pin
- FeaturesUSB 3.0+ USB2.0 (for enhanced power) to SATA 22pin female, C
- Package ContentsUSB 3.0 to SATA III converter
- Connect 2.5″ SATA drives via USB 3.0
- UASP support accelerates transfer speeds on compatible hosts
- USB 3.0 plus extra USB 2.0 header for power
- 6-inch cable keeps setup compact and portable
- ASMT1053e chipset handles SATA III 6 Gbps drives
USB 3.0 to SATA 2.5" Adapter
This adapter connects a 2.5 inch SATA hard drive or solid-state drive to a USB 3.0 Type-A port. It uses the ASMT1053e chipset and a 22-pin SATA connector. Power is drawn from the USB 3.0 bus with an extra USB 2.0 plug reserved for additional current when a drive demands it. The six-inch cable keeps the setup compact for mobile use.
Suits drives needing extra USB power
It suits users who want to access a 2.5 inch SATA drive on a laptop or desktop without an external power brick. The supplementary USB 2.0 header feeds extra current to drives that exceed the single port limit. It does not work with 3.5 inch drives because they require 12 V power which the host cannot supply. Builders needing to connect larger desktop drives should look at a different solution.
Handles SATA III 6 Gbps drives
The adapter supports SATA III 6 Gbps, SATA II 3 Gbps and SATA I 1.5 Gbps devices. USB 3.0 caps the practical throughput at 5 Gbps, so the fastest SATA SSDs will hit that ceiling. UASP is supported for lower overhead when the host controller also implements it. Drives with higher sustained transfer requirements will be limited by the USB 3.0 link.
Highlights
- Connect 2.5″ SATA drives via USB 3.0
- UASP support accelerates transfer speeds on compatible hosts
- USB 3.0 plus extra USB 2.0 header for power
- 6-inch cable keeps setup compact and portable
- ASMT1053e chipset handles SATA III 6 Gbps drives
Specifications
| Type | USB to SATA |
|---|---|
| Specifications | Type: USB 3.0 Type A to SATA III 6Gpbs Adapter,with UASP supports Data Rate: Support USB 3.0 5Gbps & SATA III 6Gbps Chipset:ASMT1053e |
| Connector A | USB 3.0+USB 2.0 |
| Connector B | SATA 22pin |
| Features | USB 3.0+ USB2.0 (for enhanced power) to SATA 22pin female, Connect your 2.5” HDD /SSD to PC or Laptop. Super Speed USB 3.0 interface technology data transfer rate can go up to 5Gb/sec (Maximum) Supports SATA III 6Gbps/SATA II 3Gbps/SATA I 1.5Gbps hard drive and solid state drive. Supports UASP, allowing for faster transfer speeds than conventional USB 3.0, when paired with a UASP-enabled host controller. Power suppply by host USB Vbus, with extra USB 2.0 reserved for power enhanced 6-inches Short cable easy for carring It does NOT work with 3.5” HDD, Because the 3.5” HDD need 12V pow |
| Package Contents | USB 3.0 to SATA III converter |
Questions about this item
Do I need a separate power supply for a 2.5-inch SATA SSD or HDD?
No, the adapter draws power from the host USB 3.0 port, and an extra USB 2.0 connector is included for drives that need more current.
Will my SATA II 3 Gbps hard drive work at full speed through this adapter?
Yes, the adapter supports SATA III 6 Gbps, SATA II 3 Gbps and SATA I 1.5 Gbps drives, so a SATA II drive runs at its native rate.
How can I confirm UASP is active after I plug the drive in?
Check Device Manager or System Information; the drive should appear under an ASMT1053e UASP controller rather than a standard USB mass-storage driver.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115165BTC
In stock
