Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Connects a 2.5" SATA drive to USB 3.0 for portable storage with 5Gbps transfer and UASP acceleration
This adapter connects a 2.5" SATA hard drive or SSD to a USB 3.0 port on a PC or laptop. It uses a JMS578 bridge controller to support SATA 6Gbps drives with 1.5Gbps, 3Gbps, or 6Gbps transfer rates. The cable length is 8 inch. It turns an internal drive into a portable external storage device for data access or migration.
Verify that your drive is a 2.5" or 1.8" SATA model; the adapter does not work with 3.5" hard drives. Confirm your host has a USB 3.0 port for full speed, though it will fall back to USB 2.0. UASP acceleration requires Windows 8, Mac OS X 10.8 or above, or Linux; older systems use standard BOT protocol. No external power supply is included or required for typical SSDs.
The male USB 3.0 plug connects directly to the host without an extra cable. The SATA connector attaches to the drive, leaving it exposed for temporary use or placement in a separate enclosure. UASP support can deliver up to 70% faster throughput versus BOT on compatible operating systems. It frees up internal drive bays by letting you run a 2.5" SATA drive externally.
| Brand | EN-Labs |
|---|---|
| Model | U3ATO2.5SSD |
| Type | 2.5" SATA to USB 3.0 |
| Cable Length | 8 inch |
| Connector A | 1x USB 3.0 male |
| Connector B | 1x 2.5in SATA III |
| Features | USB 3.0 to 2.5" 6Gbps SATA Converter 2.5 inch SSD to USB 3.0 Adapter Base on JMS578 USB 3.1 Gen1 to SATA 6Gbps bridge controller Adpater It provides a low power and high-performance solution for external solid state drive, hard disk drive, and optical disc drive. Turn a 2.5" SATA hard drive or SSD (with 1.5Gbps, 3Gbps, or 6Gbps data transfer rate) into a portable external hard drive easily Rapid data transfer rates up to 5Gbps through the USB 3.0 port with UASP (USB Attached SCSI Protocol) support for up to 70% faster performance compared to traditional BOT (Bulk-Only Transport) mass |
The box includes the 8-inch cable with a USB 3.0 male plug on one end and a 2.5" SATA connector on the other. No extra parts are needed for a 2.5" drive; the cable powers the drive from the USB port.
It works with any 1.8" or 2.5" SATA hard drive or SSD running at 1.5, 3 or 6 Gbps. It does not support 3.5" drives.
The JMS578 bridge controller delivers up to 5 Gbps over USB 3.0. With UASP enabled on Windows 8, Mac OS X 10.8 or later, or Linux, throughput can be up to 70% faster than the older BOT protocol.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?