We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular fan hub with eight three-pin headers, a Molex power plug and a silver control knob

EN-Labs

EN-Labs TX3CO8D 8-Port Fan Hub Splitter with Knob Controller

SKU CH-F9EV-V1YTV

Connects eight 3-pin or 4-pin fans to one Molex power source and adjusts all speeds together from zero to 100 percent with a single knob

  • TypeFan speed controller
  • Connector AMolex 4pin
  • Connector B8 x TX3 3pin fan header
  • Connector Number9
  • SpecificationsType - 8 Channel Fan Speed Controller Fan quantity controlle
  • FeaturesEn-Labs TX3CO8D 3pin fan speed controller is suitable for 12
  • Controls up to eight fans from a single knob
  • Adjusts speed continuously from zero to 100 percent
  • Powers all channels through one Molex connector
  • Compatible with both 3-pin and 4-pin fans via voltage regulation
  • Supports 12 V total current up to 3 A across all ports

8-Channel Fan Hub with Knob Control

The EN-Labs TX3CO8D is an internal fan hub that connects up to eight 3-pin or 4-pin fans to a single Molex 4-pin power source. A front-mounted knob adjusts the voltage for all connected fans simultaneously across a 0% to 100% range. It is built for enthusiasts who want manual, unified speed control over multiple case or component fans without software.

Replaces Motherboard Headers and Software Curves

This hub replaces the need for multiple motherboard fan headers or splitters that rely on PWM signals the board may not provide. The jump is worth it when your board lacks enough 3-pin or 4-pin headers, or when you prefer a single physical dial over BIOS curves or desktop utilities. It draws power directly from the PSU via Molex, bypassing header current limits entirely.

Check Molex Availability and Fan Voltage Needs

Verify your power supply has a spare Molex 4-pin connector to feed the hub. Confirm your fans are 12 V models compatible with voltage-based speed control; the hub does not output PWM signals, so 4-pin fans will run in voltage mode only. The total combined draw across all eight channels must not exceed the rated 3 A limit.

Highlights

  • Controls up to eight fans from a single knob
  • Adjusts speed continuously from zero to 100 percent
  • Powers all channels through one Molex connector
  • Compatible with both 3-pin and 4-pin fans via voltage regulation
  • Supports 12 V total current up to 3 A across all ports

Specifications

BrandEN-Labs
ModelTX3CO8D
TypeFan speed controller
Connector AMolex 4pin
Connector B8 x TX3 3pin fan header
Connector Number9
SpecificationsType - 8 Channel Fan Speed Controller Fan quantity controller - 8 Channel Speed Controller method - Regulator Stepless Voltage Governor Control method - All fans speed controlled by knob simultaneously Power by - Molex 4pin Current - 12V 3A max for total 8 channel
FeaturesEn-Labs TX3CO8D 3pin fan speed controller is suitable for 12V CPU fan, chassis fan, video card fan, south bridge fan, north bridge fan, hard disk fan, server fan, inverter fan etc,all kinds of 3pin or 4pin fans. Advance for PC mining cooling Increase speed to reduce computer part temperature when computer parts are busy. Reduce speed to reduce noise & power consumption when computer parts are free. Supports computer parts with cooling fan, like CPU, HDD, DDR, VGA, etc. Power by Molex 4pin female Support 8 channels fan speed adjust simultaneously Fans can be turned off or adjusted to

Questions about this item

Does the TX3CO8D need a Molex 4-pin power connector from the PSU?

Yes, the hub draws all power through a single Molex 4-pin female connector from the PSU.

How do I set the fan speeds once the eight 3-pin headers are plugged in?

Turn the single front-mounted knob; every connected fan changes speed together from 0% to 100%.

What is the total current limit I must stay under when all eight fans are running?

The combined draw for all eight channels must not exceed 3 A at 12 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.