We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 6-inch SATA cable with 90-degree and straight connectors in UV blue

EN-Labs

EN-Labs SATA6UVBL90 SATA cable 90° to 180° 6" UV Blue

SKU CH-2PGY-97VX9

A 6-inch SATA III data cable with a 90-degree to 180-degree angled connector and latch for secure drive connections in tight spaces

  • TypeSATA III
  • Length6" - 10"
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA
  • Terminal GenderFemale to Female
  • Specifications- Connector : 7-pin SATA 90 degree to 180 Degree latching Re
  • 90° to 180° angled connectors fit tight build spaces
  • Latching straight connector secures the link in cramped cases
  • 6 Gbps SATA III bandwidth handles modern SSD speeds
  • 26 AWG tinned copper conductors with shielding protect signal integrity
  • UL listed and RoHS compliant for safety and environmental standards

Right-angle SATA cable for tight builds

The EN-Labs SATA6UVBL90 is a 6-inch SATA III data cable with a 90-degree connector on one end and a straight 180-degree connector on the other. It links SSDs or hard drives to motherboards and host controllers in cramped cases. The short length reduces clutter and improves airflow. The UV-blue jacket adds visibility during installation.

Latching connectors and shielded copper

Each end uses a 7-pin SATA receptacle with an "L" type key. The straight connector includes a latch that locks into the port, preventing accidental disconnection when cables are routed near other components. Shielded 26 AWG tinned copper conductors carry signals up to 6.0 Gbps. The cable meets UL listing and RoHS compliance standards.

Replaces loose or stiff straight cables

This cable upgrades installations where a straight connector blocks adjacent ports or presses against a drive cage. The right-angle end fits flush against the drive, while the latched straight end stays seated on the motherboard. It is not suited for external eSATA enclosures or runs longer than the supplied 6 inches. Builders needing extended reach should select a longer cable.

Highlights

  • 90° to 180° angled connectors fit tight build spaces
  • Latching straight connector secures the link in cramped cases
  • 6 Gbps SATA III bandwidth handles modern SSD speeds
  • 26 AWG tinned copper conductors with shielding protect signal integrity
  • UL listed and RoHS compliant for safety and environmental standards

Specifications

BrandEn-Labs
ModelSATA6UVBL90
TypeSATA III
Length6" - 10"
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Terminal GenderFemale to Female
Specifications- Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector
- Supports SATA revision III up to 6 Gbps
- Backwards compatible with SATA I, II ports
- Cable length is 6 inches,
- 26AWG tinned copper conductors
- UL listed and RoHS compliant
ShieldingYes
ConductorCopper Conductor
FeaturesThe SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers.
The straight connector has a latch to provide a secure connection in tight spaces.
IT technicians always need a spare on hand as a troubleshooting tool.
DIY gamers can quickly upgrade their computer for expanded storage.
It is backed by a lifetime warranty and product support.
Cable Length6"
Style1 Angle

Questions about this item

What speed does the SATA III 6 Gbps interface actually deliver with this cable?

The cable supports up to 6.0 Gbps, but real-world throughput is limited by the drive and controller you connect.

Will the 90-degree to 180-degree connectors fit my drive and motherboard ports?

One end is a right-angle 7-pin plug; the other is straight with a latch. Both use the standard L-type key.

How do I install it so the latch actually locks?

Align the straight connector, push straight in until the metal latch clicks, then route the 6-inch cable to the angled end.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.