EN-Labs
EN-Labs SATA24UVBL90 24" 90° to 180° SATA cable UV Blue
A 24-inch SATA cable with a 90-degree to 180-degree angled connector and latch for secure internal drive connections
- TypeSATA III
- Length21" - 25"
- Cable Length24"
- Connector Number2
- Connector Detail1 x SATA to 1 x SATA
- Terminal GenderFemale to Female
- Secure latch on straight connector prevents accidental disconnection
- 90° to 180° angle simplifies routing in tight cases
- 24-inch length suits standard drive-to-motherboard runs
- 0 Gbps SATA III support with SATA I/II backward compatibility
- UL-listed and RoHS-compliant with 26AWG tinned copper conductors
Cable layout and use
The EN-Labs SATA24UVBL90 is a 24 inch SATA III data cable with one 90 degree connector and one 180 degree connector. It links a hard drive or solid-state drive to a motherboard or host controller in builds where the drive sits close to the board edge or behind other cards. The latch on the straight end secures the connection in tight spaces.
Shielding and signal quality
A copper conductor and 26AWG gauge carry the signal, while shielding helps reject interference inside a crowded case. The design supports SATA revision III up to 6.0 Gbps and remains backwards compatible with SATA I and II ports. UL listing and RoHS compliance confirm the materials meet recognised safety and environmental standards.
Sustained transfer behaviour
Under continuous read or write workloads the cable maintains the rated link speed as long as the attached drive and controller can sustain it. The fixed 24 inch length limits routing options in larger chassis, and the single-angle layout may not suit drives mounted at unconventional angles. Actual throughput is always bounded by the slowest device in the chain.
Highlights
- Secure latch on straight connector prevents accidental disconnection
- 90° to 180° angle simplifies routing in tight cases
- 24-inch length suits standard drive-to-motherboard runs
- 0 Gbps SATA III support with SATA I/II backward compatibility
- UL-listed and RoHS-compliant with 26AWG tinned copper conductors
Specifications
| Brand | En-Labs |
|---|---|
| Model | SATA24UVBL90 |
| Type | SATA III |
| Length | 21" - 25" |
| Cable Length | 24" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 24 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | 1 Angle |
Questions about this item
How do I install the 90-degree-to-180-degree SATA cable and which connector orientation is commonly confused?
Route the 90-degree plug to the drive in tight bays and the 180-degree plug to the motherboard; the latch on the straight end clicks only when fully seated.
What maintenance or replacement will this 24-inch SATA III cable need over time?
No scheduled maintenance; replace only if the latch breaks or the 26AWG conductors show damage from repeated flexing.
What limit appears first on this shielded copper cable during sustained 6.0 Gbps transfers?
The practical ceiling is the 6.0 Gbps SATA III rating; actual throughput cannot exceed the slowest connected device.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



