We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight 24 inch SATA cable with blue UV finish and latching connectors

EN-Labs

EN-Labs SATA24UVBL SATA cable 24 inch UV Blue

SKU CH-A88K-YJJPW

A 24-inch SATA III cable with locking 180-degree connectors supports 6.0 Gbps data transfer

  • TypeSATA III
  • Length21" - 25"
  • Cable Length24"
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA
  • Terminal GenderFemale to Female
  • 6 Gbps transfer speed supported
  • 24 inch length fits most builds
  • Latching connectors prevent accidental disconnects
  • 26AWG tinned copper conductors with shielding
  • Backwards compatible with SATA I and II

24-inch SATA III cable

The EN-Labs SATA24UVBL is a 24-inch SATA III data cable designed for internal drive connections. It links SATA III, II or I hard drives and SSDs to motherboards or host controllers. The UV blue jacket aids cable identification inside a case.

Straight latching connectors

Each end carries a 7-pin 180-degree straight receptacle with a latch that secures the connection in tight spaces. Shielded 26 AWG tinned copper conductors support the SATA 6 Gbps specification while remaining backwards compatible. The cable fits standard drive bays and motherboard headers without adapters.

6 Gbps headroom

The link operates at up to 6 Gbps when both drive and controller support SATA III, and falls back to lower revisions automatically. Actual throughput is limited by the attached equipment, so legacy ports will run at their rated speeds. One cable handles a single drive; additional drives require extra cables.

Highlights

  • 6 Gbps transfer speed supported
  • 24 inch length fits most builds
  • Latching connectors prevent accidental disconnects
  • 26AWG tinned copper conductors with shielding
  • Backwards compatible with SATA I and II

Specifications

BrandEn-Labs
ModelSATA24UVBL
TypeSATA III
Length21" - 25"
Cable Length24"
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Terminal GenderFemale to Female
Specifications- Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector
- Supports SATA revision III up to 6 Gbps
- Backwards compatible with SATA I, II ports
- Cable length is 24 inches,
- 26AWG tinned copper conductors
- UL listed and RoHS compliant
ShieldingYes
ConductorCopper Conductor
FeaturesThe SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers.
The straight connector has a latch to provide a secure connection in tight spaces.
IT technicians always need a spare on hand as a troubleshooting tool.
DIY gamers can quickly upgrade their computer for expanded storage.
It is backed by a lifetime warranty and product support.
StyleStraight

Questions about this item

What maximum data rate does this 24 inch SATA III cable support?

The cable supports SATA revision III up to 6.0 Gbps, though actual speed is limited by the connected drive and host controller.

Does the latch on the 7-pin connectors add noticeable heat or noise during continuous use?

No, the latching connectors are passive mechanical parts and add no heat or noise during all-day operation.

Which devices must already be in the system for this 24 inch cable to function?

You need a motherboard or host controller with a 7-pin SATA port and a drive with a matching 7-pin SATA interface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.