We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA cable with 90-degree and straight locking connectors, 24 inches

EN-Labs

EN-Labs SATA24BK90 24" SATA III 90° to 180° locking cable

SKU CH-TZ25-WFWPB

A 24-inch SATA III cable with a 90-degree to 180-degree locking connector for secure internal drive connections

  • TypeSATA III
  • Length21" - 25"
  • Cable Length24"
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA
  • Terminal GenderFemale to Female
  • Secure latch keeps the cable seated in tight builds
  • 90° to 180° routing clears cramped drive bays
  • 24-inch length reaches most motherboard-to-drive runs
  • 0 Gbps SATA III support with legacy SATA I/II compatibility
  • 26 AWG tinned copper conductors with UL listing and RoHS compliance

Cable geometry and locking

The EN-Labs SATA24BK90 is a 24-inch SATA III data cable with one 90-degree and one straight 180-degree connector. Both ends use a 7-pin latching receptacle that clicks into place, preventing accidental disconnection in tight drive bays. It suits system builders and IT technicians who need a reliable link between a motherboard or host controller and a SATA hard drive or SSD.

Sustained throughput behaviour

Rated for SATA revision III at up to 6.0 Gbps, the cable maintains that bandwidth across its full length without signal degradation. The 26 AWG tinned copper conductors and full shielding keep crosstalk low during long file transfers or continuous backup jobs. Actual speed is limited by the connected drive and controller, not by the cable itself.

Build quality and daily implications

UL listed and RoHS compliant, the cable uses durable moulded strain relief at each end to resist fatigue from repeated insertion. The mixed-angle design routes cleanly along chassis walls or behind drive cages, reducing clutter and improving airflow. The locking latch stays engaged even when vibration or cable movement occurs during routine maintenance.

Highlights

  • Secure latch keeps the cable seated in tight builds
  • 90° to 180° routing clears cramped drive bays
  • 24-inch length reaches most motherboard-to-drive runs
  • 0 Gbps SATA III support with legacy SATA I/II compatibility
  • 26 AWG tinned copper conductors with UL listing and RoHS compliance

Specifications

BrandEn-Labs
ModelSATA24BK90
TypeSATA III
Length21" - 25"
Cable Length24"
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Terminal GenderFemale to Female
Specifications- Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector
- Supports SATA revision III up to 6 Gbps
- Backwards compatible with SATA I, II ports
- Cable length is 24 inches,
- 26AWG tinned copper conductors
- UL listed and RoHS compliant
ShieldingYes
ConductorCopper Conductor
FeaturesThe SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers.
The straight connector has a latch to provide a secure connection in tight spaces.
IT technicians always need a spare on hand as a troubleshooting tool.
DIY gamers can quickly upgrade their computer for expanded storage.
It is backed by a lifetime warranty and product support.
Style1 Angle

Questions about this item

Does the 90-degree latch connector add any heat or power draw when the cable runs continuously?

The cable is passive with 26AWG copper conductors and shielding, so it adds no heat or power draw during all-day operation.

What motherboard port and drive connector must already be present for this 24-inch SATA III cable to work?

A standard 7-pin SATA port on the motherboard or host controller and a matching 7-pin SATA connector on the drive are required.

Will the 90-degree-to-180-degree locking cable work with an older SATA I or SATA II drive I plan to keep?

Yes, the cable is backwards compatible with SATA I and SATA II ports while supporting up to 6.0 Gbps on SATA III.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.