Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
An 18-inch SATA III cable with 90-degree to 180-degree latching connectors for internal drives
This 18-inch SATA 3.0 cable links a motherboard or host controller to an internal hard drive, SSD or optical drive. The 90-degree plug on one end and straight 180-degree plug on the other suit cramped drive bays or low-profile backplanes. Backwards compatibility covers SATA I and II ports. It is built for system integrators who need a secure fit in compact chassis.
Each 7-pin receptacle carries a locking latch that clicks into place, so vibration or cable routing cannot pull the link loose during transport or daily operation. The angled entry also reduces strain on the drive port when cables are dressed behind a motherboard tray. No software or driver is involved; the mechanical lock is the only addition over a standard SATA lead.
The conductors are 26 AWG tinned copper wrapped in shielding, meeting UL listing and RoHS compliance for flame resistance and restricted substances. The black jacket is 18 inches long, giving enough reach for typical mid-tower layouts without excess slack. Builders who need longer runs or right-angle plugs on both ends should select a different cable.
| Brand | En-Labs |
|---|---|
| Model | SATA18BK90 |
| Type | Cable Connectors |
| Color | Black |
| Length | 18 inches |
| Cable Length | 18 inches |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Speed | 6Gbos |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 18 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | SATA revision 3.0 (aka SATA III) provides up to 6 Gbps data throughput, Backwards compatible with SATA revision 1 and 2 (aka SATA I and SATA II). This Cable connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives. 90-degree design can make for better cable management in some situations, especially in tight spaces. Includes locking latch on each end of the cable to ensure it doesn't work itself loose. |
The locking latch is moulded into each 7-pin SATA plug and is not a separate replaceable part; the cable itself is the serviceable unit.
The connected drive or controller caps the rate; the cable is rated for the full SATA 3.0 6.0 Gbps specification.
The thin 26 AWG tinned copper conductors carry only the low-voltage SATA signalling current, so measurable heat does not develop.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?