We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black SATA cables, one straight and one 90 degree angled, each 18 inches long with metal locking latches

EN-Labs

EN-Labs SATA182PK SATA cable 2 pack 18 in straight 90 degree locking

SKU CH-ARDQ-CDC5M

A two-pack of 18-inch SATA III cables — one straight, one 90-degree — each with a locking latch for secure 6 Gbps storage connections

  • TypeSATA Data Cable
  • ColorBlack
  • Length18 inches
  • Cable Length1.5 ft.
  • Connector Number2
  • SpecificationsTwo SATA data cables are compatible with all SATA connectors
  • Fast 6 Gbps transfers with SATA III support
  • Locking latches prevent accidental cable disconnection
  • 90-degree angled cable fits tight drive bays
  • Straight cable suits standard motherboard layouts
  • Two 18-inch cables cover multiple drives

Two-cable SATA bundle

This pack supplies two 18-inch SATA III data cables for connecting hard drives, solid-state drives or optical drives. One cable has straight connectors on both ends while the other adds a 90-degree angled plug for tight routing. Both support the 6 Gbps SATA III standard and remain compatible with earlier SATA revisions.

Passive thermals and power

The cables carry only low-voltage signalling, so they add no measurable heat or acoustic load to the system. No external power is required and the thin black sheath keeps airflow unrestricted around other components. Locking metal latches on each connector prevent accidental unplugging during routine maintenance.

Straight and angled connectors

The straight cable suits open drive bays while the right-angle version eases insertion behind motherboards or in cramped chassis corners. Both 18-inch lengths reach typical internal drive locations without excess slack. The pair covers the two most common internal routing scenarios in a single purchase.

Highlights

  • Fast 6 Gbps transfers with SATA III support
  • Locking latches prevent accidental cable disconnection
  • 90-degree angled cable fits tight drive bays
  • Straight cable suits standard motherboard layouts
  • Two 18-inch cables cover multiple drives

Specifications

BrandEN-Lab
ModelSATA182PK
TypeSATA Data Cable
ColorBlack
Length18 inches
Cable Length1.5 ft.
Connector Number2
SpecificationsTwo SATA data cables are compatible with all SATA connectors (HDD, SSD, CD DVD Bluray drives). Realizing fast and interference-free data transmissions. The top speeds up to 6 Gbps. Downwards compatible with SATA I & II. SATA III male to SATA III male Supports transfer rates of up to 6 GB depending on the peripherals used.

Questions about this item

How do I install the straight and 90-degree SATA cables and what step do people often miss?

Plug each SATA III male connector into the drive and motherboard ports until the metal locking latch clicks; the step people miss is pressing the latch release before pulling the cable out.

What maintenance or replacement will these SATA cables need later?

No scheduled maintenance is required; replace a cable only if the locking latch breaks or the connector pins become bent.

What limit appears first under sustained use with these SATA III 6 Gbps cables?

The practical throughput limit is the 6 Gbps SATA III interface, which the drive or controller will reach before the cable itself becomes a bottleneck.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.