We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Y-cable with SATA 15-pin male to LP4 and SP4 female connectors

EN-Labs

EN-Labs SATA to LP4 & SP4 Splitter Cable 8 Inches

SKU CH-M4Z0-1YD0C

A splitter cable delivering SATA power to both a Molex LP4 and SP4 connector for legacy drives

  • TypeCable Splitters
  • ColorMulti-Color
  • Length6" - 10"
  • Connector Number3
  • Terminal GenderMale to Female
  • FeaturesProvide power to your Molex 4pin IDE drive and SP4 Floppy Dr
  • Powers IDE Molex LP4 and SP4 drives from a SATA 15-pin connector
  • 20AWG copper conductor with UL Listed rating
  • 8-inch length fits tight desktop or server builds
  • Y-splitter design feeds two legacy devices from one SATA 15-pin port
  • Male-to-female terminals ensure secure internal power connections

SATA to LP4 and SP4 Splitter

This cable adapts a single SATA 15-pin power connector into both a Molex LP4 and an SP4 floppy drive connector. It suits builders adding legacy IDE optical drives, hard drives, or floppy drives to a modern power supply that only offers SATA power outputs. The Y-splitter design powers two different legacy devices from one port.

Desktop and server upgrades with legacy drives

The splitter serves systems that still run IDE Molex LP4 hard drives or SP4 floppy drives but lack native connectors on the PSU. It is not for installations that require a straight-through cable without a split, builds needing more than one LP4 or SP4 connector per SATA port, or users who need longer reach than the fixed short length allows.

20AWG copper conductors with UL listing

The cable uses 20AWG copper wire rated for 12V and 5V delivery to IDE devices. UL listing confirms the materials meet recognised safety standards for internal power wiring. This specification determines whether the splitter can reliably supply the current your legacy drives demand.

Highlights

  • Powers IDE Molex LP4 and SP4 drives from a SATA 15-pin connector
  • 20AWG copper conductor with UL Listed rating
  • 8-inch length fits tight desktop or server builds
  • Y-splitter design feeds two legacy devices from one SATA 15-pin port
  • Male-to-female terminals ensure secure internal power connections

Specifications

BrandEn-Labs
ModelSATA2LP4SP412
TypeCable Splitters
ColorMulti-Color
Length6" - 10"
Connector Number3
Terminal GenderMale to Female
FeaturesProvide power to your Molex 4pin IDE drive and SP4 Floppy Drivethrough a standard SATA 15pin connection from your power supply
Ideal for desktop or servers that use IDE Molex PL4 & SP4 Drives. It enables connecting an internal IDE Molex LP4 & SP4 device to a power supply with only SATA 15pin power connectors remaining.
Connects any IDE Molex LP4 and SPL to a standard SATA power connector

Questions about this item

What type of power connector must my PSU have free to use this splitter?

Your power supply needs an available SATA 15pin power connector to plug the male end of this cable into.

Can I run a legacy IDE hard drive and a floppy drive simultaneously from one SATA port?

Yes, the Y-splitter provides both an LP4 connector for an IDE drive and an SP4 connector for a floppy drive from the single SATA source.

How do I confirm the cable is delivering power correctly after installation?

Both connected drives should spin up and be detected by the BIOS when the system is powered on.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.